Question

What are the storage conditions for thickener 6000DS, thickener 638, and PEG-150?

Answer
2026-05-17 官方文档 增稠剂6000DS,增稠剂638,PEG-150

Thickener 6000DS and thickener 638 (PEG-150 distearate) should be stored in a cool, dry, and well-ventilated warehouse, with a recommended temperature not exceeding 45℃ and relative humidity below 70%. The unopened shelf life is two years.

Detailed Explanation

The PEG-150 distearate series products (including the powder form thickener 6000DS and the liquid form thickener 638) are nonionic surfactants with stable chemical properties and are not flammable. However, environmental conditions must be controlled during storage to ensure product performance is not affected. The powder product (6000DS) should be kept away from moisture to prevent caking; the liquid product (thickener 638) should avoid drastic temperature fluctuations to prevent phase separation or a decrease in transparency.

The storage environment should be away from moisture, rain, and direct sunlight, and the warehouse must maintain good ventilation. Product packaging containers should always be kept sealed and placed on pallets at an appropriate distance from the ground to prevent ground moisture ingress. If not fully used after opening bags or drums, they should be immediately and securely resealed to prevent the product from absorbing moisture or being contaminated.

Storage Conditions Summary

Storage ParameterRequirement
Storage EnvironmentCool, dry, well-ventilated warehouse, away from moisture, rain, and direct sunlight
Recommended TemperatureNot exceeding 45℃
Recommended HumidityRelative humidity below 70%
Packaging ManagementKeep original containers sealed, place on pallets, reseal after opening bags/drums
Incompatible SubstancesKeep away from strong acids, strong bases, and active oxidizing agents
Shelf LifeEffective storage period of two years for unopened products from the date of manufacture
Transportation HandlingHandle as general chemical products, load and unload gently to prevent packaging damage and dust emission

Application Recommendations

It is recommended to establish a "first-in, first-out" inventory management principle to avoid long-term accumulation. For powder thickener 6000DS, regularly check for caking; for liquid thickener 638, observe for any layering or color change. If the products are properly stored under recommended conditions, stable thickening efficiency and compatibility performance can be maintained within the two-year shelf life.

Precautions

  • Avoid drastic temperature fluctuations during storage. In particular, thickener 6000DS powder is prone to moisture absorption and caking under large temperature differences, affecting dispersion and solubility.
  • Accumulated fine dust of powder products may form combustible dust clouds when mixed with air. The storage area should be kept away from open flames, heat sources, and strong oxidizing agents.
  • Liquid product thickener 638 may experience increased viscosity or turbidity at low temperatures, which is a normal physical phenomenon. After returning to room temperature and stirring evenly, it can be used without affecting product performance.
  • In case of leakage, use dust-proof tools (for powder) or absorbent materials (for liquid) to collect into sealed containers, preventing the material from entering drains or water bodies.