Dodecyl Polyoxyethylene Ether AC-1210 (CAS No.: 26635-75-6) is a nonionic surfactant that is chemically stable under normal temperature and pressure. This product is hygroscopic, so the container must be kept tightly sealed during storage. It is recommended to store it in the original container to avoid moisture absorption from the air that could lead to deterioration. The product has a flash point greater than 150°C and is not classified as dangerous goods, but it should still be kept away from heat sources and high temperatures.
The storage environment should avoid direct sunlight, as ultraviolet radiation may trigger slow oxidative degradation, affecting the color and performance of the product. Additionally, the product exhibits weak cationic properties and should be kept away from strong oxidizers, strong acids, and strong bases and other incompatible substances to prevent chemical reactions that could cause product failure or safety hazards.
Under recommended storage conditions (temperature 5～40°C, original sealed container, cool, dry, and well-ventilated), the shelf life of the product can reach two years. It is recommended to manage inventory using the "first-in, first-out" principle. Products exceeding the shelf life should undergo performance testing before further use, and only those passing the test should be used.
| Parameter Item | Parameter Value |
|---|---|
| Appearance | Colorless to slightly yellow liquid |
| Storage Temperature Range | 5～40°C |
| Shelf Life | Two years (under recommended storage conditions) |
| Flash Point | >150°C |
| Hygroscopicity | Hygroscopic |
| Density | 1.02 g/cm³ (25°C) |
| Chemical Stability | Stable under normal temperature and pressure |
| Conventional Packaging | 50kg plastic drum / 200kg plastic drum / IBC tote |
After opening the drum, reseal the container as quickly as possible to minimize the product's exposure to air. If the product becomes turbid or stratified at low temperatures, this is a normal physical change. Move the container to a warm environment to slowly return to room temperature and stir evenly before use; product performance will not be affected. Special attention should be paid to frost protection in winter to prevent the product from solidifying at temperatures below 0°C, which could cause difficulties in dispensing.