Castor Oil Polyoxyethylene Ether EL-60 (PEG-60 Castor Oil) is a non-hazardous chemical, classified as a non-hazardous substance under GHS, but still requires compliance with standard chemical management procedures during storage to ensure product quality stability and safe use. This product appears as a light yellow paste; under high temperature or drastic temperature changes, its properties may change, affecting its core performance such as emulsification and dispersion.
The storage environment should be kept cool, dry, and well-ventilated. Keep away from heat sources, ignition sources, and incompatible substances (such as strong oxidizers), and avoid direct sunlight. The storage area should be equipped with appropriate spill containment materials and emergency eyewash and safety shower equipment, and the "first in, first out" principle should be implemented for outbound delivery.
It should be particularly noted that storage containers should be made of rust-proof and corrosion-resistant materials, ensure labels are clear and intact, and avoid leakage. It is strictly prohibited to mix with food, beverages, and animal feed. Limit on-site storage quantities to reduce risk. This product is non-irritating to skin and eyes, but unnecessary direct contact should still be avoided.
| Storage Requirement | Specific Description |
|---|---|
| Temperature | Recommended not to exceed 40°C, avoid drastic temperature changes |
| Light | Avoid direct sunlight |
| Environment | Cool, dry, well-ventilated dedicated warehouse |
| Container | Keep tightly sealed, use rust-proof and corrosion-resistant storage containers, labels clear and intact |
| Away from | Heat sources, ignition sources, strong oxidizers and other incompatible substances |
| Prohibitions | Strictly prohibited from mixing with food, beverages, and animal feed |
| Management | Implement "first in, first out" principle, limit storage quantity |
| Emergency Facilities | Equipped with spill containment materials, emergency eyewash and safety shower equipment |
Before taking out for use, it is recommended to check whether the product appearance is normal (should be a light yellow paste, without stratification, odor, or abnormal discoloration). If the product coagulates or crystallizes due to low temperature, it can be slowly warmed up and stirred evenly at a temperature not exceeding 40°C before use. It is strictly forbidden to directly heat with open flame or high temperature to avoid damaging the product structure.
Unused product after opening should be sealed promptly to avoid prolonged exposure to air that may cause moisture absorption or contamination. It is recommended to use up the product within the shelf life to ensure the best application effect.