Question

Is emulsifier A-103 (polyoxyethylene oleate) compliant with environmental requirements? Can a test report be provided?

Answer
2026-06-06 官方文档 乳化剂A-103,油酸聚氧乙烯酯

Emulsifier A-103 (polyoxyethylene oleate) has certain limitations in environmental protection. Its GHS classification indicates that it is harmful to aquatic life (H412), and it is not a completely environmentally friendly product. Test reports should be obtained from the sales or technical department of Guoli Chemical.

Detailed Explanation

According to the safety data of emulsifier A-103 (polyoxyethylene oleate, CAS No.: 9004-96-0) from the Guoli Chemical product database, this product is classified under the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) as harmful to aquatic life with long lasting effects (Hazardous to the aquatic environment — chronic toxicity, category 3, H412). This means that if released into the aquatic environment, the product may cause sustained negative effects on aquatic organisms such as fish and algae, and it does not fully comply with current stringent green environmental standards.

However, it should be noted that "environmentally friendly" is a relative concept. Emulsifier A-103 has good biodegradation potential (the ester bond in the polyoxyethylene ester structure can gradually hydrolyze in the natural environment) and does not contain heavy metals, APEO (alkylphenol ethoxylates), or other substances of high concern that are explicitly restricted or banned by international regulations. Compared with traditional emulsifiers containing phenols, phosphorus, or benzene ring structures, its environmental friendliness is relatively superior. In practical applications, through reasonable process control and wastewater treatment, its environmental exposure risk can be effectively reduced.

Technical Parameters

Parameter ItemDescription
GHS Environmental Hazard ClassificationHazardous to the aquatic environment — chronic toxicity, category 3 (H412)
Hazard StatementHarmful to aquatic life with long lasting effects
BiodegradabilityEster bond structure is hydrolyzable, with certain biodegradation potential (specific degradation rate requires actual measurement)
Contains APEONo (polyoxyethylene oleate is not an alkylphenol ethoxylate)
Heavy Metal ContentNone (the product is a nonionic surfactant, not a metal salt)

Application Recommendations

When using emulsifier A-103, to reduce environmental impact, it is recommended:

  • Wastewater Treatment: Production wastewater should be collected and subjected to harmless treatment in accordance with hazardous waste regulations. Direct discharge into sewers, surface water, or soil is strictly prohibited.
  • Spill Prevention and Control: In case of a spill, immediately use inert materials such as sand or vermiculite to absorb, collect the material as hazardous waste, and do not flush into the environment.
  • Consideration of Formulation Alternatives: If the end product needs to meet stringent environmental certifications (e.g., EU Ecolabel, Blue Angel, etc.), it is recommended to communicate with the technical team of Guoli Chemical to evaluate alternatives or compatibility solutions to reduce overall environmental risk levels.
  • Compliant Use: When used in compliant industrial scenarios with adequate wastewater treatment facilities, environmental emissions can be effectively controlled.

Regarding Test Reports

The product database does not currently include electronic documents of third-party environmental test reports for emulsifier A-103 (such as biodegradability test reports, aquatic toxicity test reports, VOC test reports, etc.). To obtain relevant test reports, it is recommended to directly contact the Sales Department or Technical Support Team of Haian County Guoli Chemical Co., Ltd.. Typically, the following types of reports can be requested:

  • RoHS\/REACH compliance test report
  • Biodegradability test report
  • Safety Data Sheet (SDS)
  • Custom test requirements for specific customers

Precautions

  • Operation must comply with GHS safety regulations, wear protective gloves, goggles, and protective clothing to avoid skin and eye contact.
  • Store in a cool, dry, well-ventilated environment at 5–35°C, keep container tightly closed, away from heat sources and incompatible substances.
  • It is strictly prohibited to directly discharge waste liquid containing this product into the environment; it must be treated harmlessly according to regulations.
  • This product is not to be used in food, pharmaceuticals, or other applications involving direct human intake.