Question

How to use Polyoxyethylene Lauryl Ether LAE-9? What is the recommended dosage?

Answer
2026-06-06 官方文档 月桂酸聚氧乙烯醚LAE-9

The dosage of Polyoxyethylene Lauryl Ether LAE-9 varies depending on the specific application and formulation system. The Guoli Chemical product database does not provide a unified recommended dosage parameter. The following is a general reference range based on different industry applications, and the specific dosage needs to be determined through formulation experiments.

Detailed Explanation

Polyoxyethylene Lauryl Ether LAE-9 is a nonionic surfactant with an HLB value of approximately 13.6, featuring good water solubility and O/W emulsifying ability. Its usage and dosage highly depend on the specific application scenario: when used as the primary emulsifier, the dosage is relatively high; when used as an auxiliary wetting or solubilizing component, the dosage is relatively low. In actual formulation development, the dosage is influenced by multiple factors such as the type and content of the oil phase, system pH, temperature conditions, and synergistic effects with other surfactants. Therefore, it is recommended to optimize the best addition ratio through orthogonal experiments or gradient experiments.

In terms of operation, LAE-9 is a light yellow to yellow transparent liquid at room temperature (may appear as a paste at low temperatures) and is soluble in water, ethanol, and other polar solvents. During formulation, it is recommended to pre-disperse or dissolve it in an appropriate amount of warm water (40~50°C) first, then add it to the main system and stir evenly. For high-content formulations, it can be premixed with the oil phase before emulsification; when used as a solubilizer, LAE-9 is usually mixed with the fragrance or oily components to be solubilized first, then water is slowly added and stirred to obtain a clear and transparent solubilized system.

Application Recommendations

The following are general reference dosages for various application scenarios of LAE-9 based on the Guoli Chemical product database (data sourced from industry experience, for reference only):

Application FieldFunctional RoleReference Dosage
Daily chemical creams/lotionsO/W primary emulsifier1.0%~5.0%
Lotions/shampoosSolubilizer for fragrances and oily ingredients0.5%~3.0%
Household liquid detergentsDetergency/wetting component2.0%~8.0%
Industrial liquid detergentsEmulsifying/degreasing component3.0%~10.0%
Textile leveling agent (working solution)Leveling/penetrating auxiliary0.5~2.0 g/L
Pesticide emulsifiable concentrate/emulsionEnvironmentally friendly emulsifier5.0%~15.0%
Metalworking fluidsWetting/emulsifying auxiliary1.0%~5.0%
Leather fatliquoring agentEmulsifying/dispersing carrier2.0%~8.0%

Technical Parameters

The following key parameters can help assess the suitability of LAE-9 in formulations (data source: Guoli Chemical product database):

Parameter NameValue
AppearanceLight yellow to yellow transparent liquid or paste (varies with temperature)
Active content≥99%
HLB value13.6
pH value (1% aqueous solution)5.0~7.0
Cloud point (1% aqueous solution)>100℃
Surface tension (1% aqueous solution, 25℃)Approx. 30 mN/m
Critical micelle concentration (CMC, 25℃)Approx. 0.1 g/L
Freezing point<-5℃

Precautions

  • Safety protection: This product is classified as an irritating chemical under GHS (H315 skin irritation, H318 serious eye damage). It is necessary to wear chemical safety goggles and impermeable gloves (such as nitrile rubber) during operation to avoid contact with skin and eyes.
  • Environmental hazards: It is extremely toxic to aquatic organisms (H410). It is strictly forbidden to discharge waste liquid containing this product directly into water bodies, sewers, or soil. Residual waste should be disposed of as hazardous waste.
  • Incompatibility: LAE-9 is an ester-type nonionic surfactant. The ester bonds will gradually hydrolyze under strong acidic or alkaline conditions. For long-term use, control the system pH within the range of 5~9 to maintain optimal stability.
  • Storage conditions: Storage temperature should be kept between 5°C and 40°C, and containers should be kept tightly closed to prevent moisture absorption. At low temperatures, turbidity or pasting may occur. After warming to room temperature and stirring evenly, normal use can still be achieved without affecting product performance.