Under normal industrial use conditions, isotridecanol polyoxyethylene ether E-1310 is not classified as highly toxic or carcinogenic, but it does present clear health hazards. According to the GHS chemical classification system, this product is classified as skin irritation (Category 2) and serious eye irritation (Category 2), with the signal word "Warning" and the hazard pictogram GHS07 (exclamation mark). This means that direct contact can cause reversible irritant injuries to the human body, but not corrosive or irreversible serious damage.
In terms of exposure routes: Skin contact may cause redness, itching, and other irritant reactions (H315); Eye contact can cause severe eye irritation, manifested as pain, tearing, and conjunctival congestion (H319); Inhalation of its aerosol or vapor may cause respiratory discomfort. It should be noted that the flash point (closed cup) of this product is greater than 150°C, making it a non-flammable liquid with no explosive or oxidizing properties under normal use conditions, and a low fire risk.
In terms of environmental impact, this product is classified as Chronic Aquatic Toxicity Category 3 (H412), meaning it is harmful to aquatic organisms (such as fish, crustaceans, and algae) and, due to its limited biodegradation rate, may have long-term persistent effects on the aquatic environment. Therefore, it is strictly prohibited to discharge the product or its waste liquid directly into surface water bodies or public drainage systems.
| Hazard Category | Hazard Code | Hazard Statement | Class |
|---|---|---|---|
| Skin Irritation | H315 | Causes skin irritation | Category 2 |
| Eye Irritation | H319 | Causes serious eye irritation | Category 2 |
| Chronic Aquatic Toxicity | H412 | Harmful to aquatic organisms with long-lasting effects | Category 3 |
Given the above hazard characteristics, when using isotridecanol polyoxyethylene ether E-1310 in industrial applications, standardized operating procedures should always be followed: Must wear chemical safety goggles or a full face shield (to prevent splashes), chemically resistant protective gloves (such as nitrile rubber or neoprene), and long-sleeved protective clothing during operations. In environments with inadequate ventilation or where aerosols may be generated, certified respirators or supplied-air respirators should also be worn. After handling, thoroughly wash hands and any potentially contacted skin areas.
For environmental control, production and use enterprises should establish a comprehensive waste liquid collection system. Leaks should be absorbed with inert absorbent materials (such as vermiculite, dry sand) and then disposed of as hazardous waste by qualified disposal agencies. For large spills, immediately construct containment dikes to prevent spread; it is strictly prohibited for firefighting wastewater or rinse water to enter stormwater drains or natural water bodies.