Under the recommended storage conditions, the shelf life of Dodecylamine Polyoxyethylene Ether AC-1210 can reach two years. The selection of storage environment is crucial for maintaining product performance. Improper storage conditions may lead to product deterioration, stratification, or decreased surface activity, thereby affecting the subsequent application effectiveness.
This product should always be stored in the original container and kept tightly closed to prevent moisture absorption and contamination. The storage area should be protected from direct sunlight, designated as a restricted access area, and posted with appropriate warning signs. At the same time, attention should be paid to prevent the product from freezing or deteriorating due to excessive heat. Extreme temperatures can damage the emulsifying properties and interfacial activity of the product.
In terms of incompatibility, this product must be stored separately from incompatible substances such as strong oxidizing agents, strong acids, and strong bases. In addition, the storage area should be equipped with necessary leakage emergency treatment facilities to promptly handle any spills and prevent pollution from spreading.
| Storage Parameter | Requirement |
|---|---|
| Storage Temperature | 5-40°C |
| Storage Environment | Cool, dry, well-ventilated |
| Light Condition | Avoid direct sunlight |
| Container Status | Keep tightly closed, use original container |
| Shelf Life | Two years (under recommended storage conditions) |
| Incompatible Substances | Strong oxidizing agents, strong acids, strong bases |
After opening and using the product, it is recommended to reseal the container as soon as possible to reduce contact with moisture and impurities in the air. For inventory that has not been used for a long time, it is recommended to regularly check the container seal and product appearance. If any abnormal phenomena such as stratification, turbidity, or odor occur, quality verification should be conducted before deciding whether to continue use. If the storage environment temperature has exceeded the range of 5-40°C, it is also recommended to perform a small-scale test to verify whether the product performance meets the requirements before use.