Question

How to use MOA-4 (AEO-4)? What is the recommended dosage?

Answer
2026-06-06 官方文档 MOA-4(AEO-4)

MOA-4 (AEO-4) should be added directly to the formulation in appropriate proportions depending on the application area. It is typically used as an emulsifier, penetrant, or dispersant component. The specific dosage varies by application and is recommended to be optimized through experiments.

Detailed Description

MOA-4 (AEO-4) is a nonionic surfactant based on C12-14 fatty alcohols. It appears as a colorless to slightly yellow transparent liquid with an HLB value of approximately 9~10. It is readily soluble in oils and organic solvents, and slightly soluble in water. It is typically used by direct addition to the formulation system, mixing well with other components under stirring. Due to its viscosity of about 60 mPa·s (25°C), it has good fluidity, facilitating operation and metering at room temperature.

When using, the addition method can be determined based on the oil phase type of the target system and the desired emulsion type (O/W type): For emulsification applications, first dissolve MOA-4 in the oil phase, then mix with the water phase for emulsification; For cleaning and penetration applications, it can be added directly to water with stirring, and compounding with anionic or amphoteric surfactants can produce synergistic effects. The product is chemically stable, resistant to acids, alkalis, and hard water, maintaining stable performance in complex systems.

It should be noted that the Guoli Chemical product database does not list precise dosage data for each application field. The reference dosages in the "Application Suggestions" below are recommended ranges based on the product characteristics and industry practice experience. The specific dosage should be optimized through gradient tests according to the actual formulation system, process conditions, and performance requirements.

Application Suggestions

Based on the characteristics and typical application scenarios of MOA-4 (AEO-4), the reference dosages for various fields are as follows (data source: industry common reference values, not direct data from the Guoli Chemical database):

  • Household Liquid Detergents (laundry detergents, dishwashing liquids): 1%~5% of total formulation, used in combination with anionic surfactants such as AES and LAS to enhance degreasing ability.
  • Industrial Cleaners (metal cleaning, hard surface cleaning): 2%~8% of total formulation, compounded with alkaline additives as a penetrant and emulsifier to remove mineral oils and greases.
  • Textile Printing and Dyeing Auxiliaries (penetrant/leveling agent): 0.5~2 g/L of working solution concentration, used in pretreatment penetration or dyeing leveling processes.
  • Leather Degreasing Agents: 3%~10% of total formulation, utilizing its excellent emulsifying and penetrating ability to remove natural fats from raw hides.
  • Pesticide Emulsifiers: 5%~15% of total formulation for emulsifiable concentrates or microemulsions, often used in combination with anionic emulsifiers (e.g., calcium dodecylbenzene sulfonate).
  • Coatings and Inks: 0.2%~1% of total formulation (based on pigment weight), to improve pigment wetting, dispersion, and system stability.
  • Emulsion Polymerization: 1%~3% of total monomer, used as primary or auxiliary emulsifier to control latex particle size distribution.

Usage Tips: Since MOA-4 has a low cloud point (approximately 25~30°C for a 1% aqueous solution), pay attention to solubility changes when used in high-temperature systems; the product is also low-foaming, making it particularly suitable for applications requiring rapid defoaming or low foam.

Technical Parameters

ParameterValue
AppearanceColorless to slightly yellow transparent liquid
Ionic TypeNonionic
HLB Value9~10
Active Content≥99%
pH (1% Aqueous Solution)5.0~7.0
Cloud Point (1% Aqueous Solution)Approximately 25~30°C
Hydroxyl Value150~165 mgKOH/g
Density (20°C)Approximately 0.96 g/cm³
Kinematic Viscosity (25°C)Approximately 60 mm²/s
Flash Point (Closed Cup)>180°C
Moisture Content≤0.5%
Free Alcohol≤1%
SolubilityReadily soluble in oils and organic solvents, slightly soluble in water (dispersible in water)
Foam CharacteristicsLow foaming
Chemical StabilityStable, resistant to acids, alkalis, and hard water

Precautions

  • During operation, must wear impermeable gloves, chemical safety goggles, and protective clothing. This product causes skin irritation and serious eye irritation (GHS classification: Skin irritation Category 2, Eye irritation Category 2A).
  • Operate in a well-ventilated area, avoid inhaling vapors or mists, and thoroughly wash exposed parts after work.
  • The product is harmful to aquatic life with long-lasting effects (H412). Do not discharge undiluted product into drains, surface water, or soil.
  • Store in a cool, dry, well-ventilated warehouse, keep containers sealed, away from heat sources and strong oxidizers.
  • Before use, it is recommended to conduct small-scale tests to verify the optimal dosage, avoiding waste or system instability due to overuse.
  • Packaging specifications: 50 kg plastic drum, 200 kg plastic drum, IBC tote, can be selected as needed.