As a nonionic surfactant, the core goal of storage conditions for OP-4 Octylphenol Polyoxyethylene Ether is to prevent moisture absorption and deterioration, avoid degradation caused by high temperatures, and prevent leakage that pollutes the environment. This product is very toxic to aquatic life with long-lasting effects (H410), so anti-seepage and leakage prevention facilities in the storage area are particularly important.
In terms of warehouse location and daily management, it must be isolated from food, feed, and incompatible substances such as strong oxidizers and strong acids to prevent cross-contamination and accidental reactions. Containers should be sealed immediately after use to avoid impurity ingress and product moisture absorption. The storage area floor should have anti-seepage capabilities and be equipped with containment dikes or drainage channels to ensure that, in the event of a leak, the product can be effectively prevented from entering the soil and water bodies.
| Storage Condition Item | Specific Requirement |
|---|---|
| Storage Environment | Cool, dry, well-ventilated warehouse |
| Recommended Storage Temperature | 5°C ~ 40°C |
| Temperature Restrictions | Avoid extreme temperatures and drastic temperature changes |
| Container Requirement | Keep sealed to prevent moisture absorption and impurity contamination |
| Away from Heat Sources | Away from heat sources, sparks, and open flames |
| Incompatible Substances | Strong oxidizers, strong acids |
| Isolation Requirement | Away from food and feed |
| Floor Protection | Anti-seepage capability, equipped with containment dikes or drainage channels |
| Flash Point (Typical Value) | >150°C, not flammable (Data source: Product safety data sheet) |
As a water-in-oil emulsifier, this product is widely used in industries such as pesticides, textiles, petroleum, cleaning, leather, and metal processing. It is recommended to check the container seal status before use, dispense only the required amount, and avoid repeated opening that exposes the product to moist air. If significant changes in product appearance or properties (such as stratification or increased turbidity) are observed after long-term storage, small-scale tests should be conducted to verify performance before batch usage.