PEG-1000/1500 (Polyethylene Glycol 1000/1500) is safe for human use under normal conditions, with extremely low acute oral toxicity, and is widely used in pharmaceuticals, cosmetics, and other fields with high safety requirements. However, during industrial operations and bulk handling, direct contact or inhalation of its dust/vapors may still cause local irritation reactions, so necessary safety precautions cannot be ignored.
According to GHS classification (based on EU CLP regulations), this product is classified as a skin irritant (Category 2, H315), eye irritant (Category 2, H319), and specific target organ toxicant following single exposure (Category 3, H335, may cause respiratory irritation). Under the old EU regulatory system, it is labeled as an irritant (Xi) with risk phrases R36/37/38 (irritating to eyes, respiratory system, and skin), safety phrases S26 (in case of contact with eyes, rinse immediately with plenty of water and seek medical advice) and S36 (wear suitable protective clothing).
During operations, choose well-ventilated areas or workplaces equipped with effective local exhaust ventilation to avoid generating and inhaling dust or vapors. Appropriate personal protective equipment must be worn, including chemical safety goggles and protective gloves (nitrile rubber or neoprene gloves recommended). Eating, drinking, and smoking are strictly prohibited in the workplace. Immediately after operation, remove contaminated work clothing and thoroughly wash exposed skin.
| Risk Type | GHS Classification | Preventive Measures |
|---|---|---|
| Skin Contact | Category 2 (H315: Causes skin irritation) | Wear nitrile rubber or neoprene protective gloves; avoid prolonged direct skin contact |
| Eye Contact | Category 2 (H319: Causes serious eye irritation) | Wear chemical safety goggles; in case of eye contact, rinse immediately with plenty of water and seek medical advice (S26) |
| Inhalation Risk | Category 3 (H335: May cause respiratory irritation) | Maintain good ventilation or install local exhaust systems; avoid inhaling dust or vapors |
PEG-1000/1500 should be stored in a cool, dry, and well-ventilated warehouse. Use moisture-proof sealed packaging, avoid direct sunlight, and keep away from strong oxidizing agents. Under recommended storage conditions, the product shelf life is stable.