According to the Guoli Chemical product database, polyethylene glycol PEG-400 is a non-ionic surfactant. One of its core advantages is good biodegradability, allowing it to gradually decompose in the natural environment without long-term accumulation. From a regulatory perspective, according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS), this product is not classified as a hazardous chemical; it has no hazard pictograms, no signal word, and no hazard statements, indicating that it is considered a low environmental risk substance under conventional environmental regulations.
However, it should be noted that the water hazard class (WGK) of PEG-400 is Class 1, indicating a slight hazard to water bodies. This means that although the product itself is not highly toxic, if a large amount leaks directly into sewers, rivers, lakes, or other water bodies, it may cause adverse effects on the aquatic ecological environment. Therefore, during use and disposal, relevant environmental regulations must still be followed, and random discharge is prohibited.
Regarding the environmental test report you inquired about, currently there are no specific environmental test report documents for this product available directly in the Guoli Chemical product database. Typically, test reports (such as biodegradability test reports, ROHS test reports, REACH compliance statements, etc.) need to be issued separately based on specific batches and customer requirements. If you need a formal environmental test report, it is recommended that you contact the sales or technical support team of Guoli Chemical directly. They will provide the latest third-party test reports and relevant compliance documents according to your specific requirements. You can also call the Guoli Chemical official customer service hotline, inform them of your purchase batch and the type of report needed, to obtain the most accurate documentation support.
In practical applications, to ensure environmental compliance, please note the following:
Leak Disposal: In case of leakage, small amounts should be absorbed and collected using inert materials such as sand; for large leaks, construct a dike and transfer the liquid with a pump into a dedicated container. It is particularly emphasized to strictly prevent the product from entering sewers or water bodies. Disposal of waste liquid and contaminated containers must comply with local and national environmental regulations; they cannot be discarded or dumped arbitrarily. Operators should wear chemical protective gloves and goggles. For specific safety parameters, please refer to the Safety Data Sheet (SDS).