What are the storage conditions for isomeric alcohol ether phosphate E-1310P?

Isomeric alcohol ether phosphate E-1310P should be stored in a cool, dry, well-ventilated place, with a recommended storage temperature of 5°C to 40°C. The container must be kept tightly closed and away from incompatible substances such as strong oxidizers, strong acids, and strong bases. < /h2>

Detailed Description< /h3>

Isomeric alcohol ether phosphate E-1310P (isomeric tridecanol polyoxyethylene (10) ether phosphate) is an anionic surfactant that is chemically stable under normal storage conditions, with no risk of flammability or explosion. To ensure product quality and extend shelf life, temperature control in the storage environment is particularly critical, and it is recommended to maintain it between 5°C and 40°C. Exceeding this temperature range may cause changes in product properties or performance degradation, such as thickening or turbidity at low temperatures, and accelerated ester bond hydrolysis at high temperatures. < /p>

The storage area should be protected from direct sunlight and heat sources to prevent photodegradation or thermal degradation of the product. The container must be kept sealed to minimize prolonged contact with air, preventing moisture absorption or oxidation. Additionally, it should be stored separately from incompatible substances such as strong oxidizers, strong acids, and strong bases. Contact with the above substances may cause adverse reactions and damage the product structure. < /p>

Key Storage Conditions< /h3>

Storage Element< /th>	Specific Requirements< /th>< /tr>
Temperature Range< /td>	5°C to 40°C< /td>< /tr>
Environmental Requirements< /td>	Cool, dry, well-ventilated< /td>< /tr>
Light< /td>	Avoid direct sunlight< /td>< /tr>
Heat Sources< /td>	Keep away from heat sources< /td>< /tr>
Container Sealing< /td>	Keep tightly closed< /td>< /tr>
Incompatible Substances< /td>	Keep away from strong oxidizers, strong acids, strong bases< /td>< /tr>
Recommended Container Material< /td>	Stainless steel, polyethylene (PE), polypropylene (PP)< /td>< /tr>
Prohibited Container Material< /td>	Carbon steel, aluminum, copper (prolonged contact may cause corrosion)< /td>< /tr>
Inventory Management< /td>	Follow the first-in-first-out principle< /td>< /tr> < /table> Application Recommendations< /h3> In actual warehouse management, it is recommended to install bunds or spill containment facilities on the warehouse floor to prevent the spread of liquid products in case of accidental leakage. Storage containers should preferably be made of stainless steel, polyethylene (PE), or polypropylene (PP), avoiding carbon steel, aluminum, or copper containers, as E-1310P, being a phosphate ester product, has a certain acidity. Prolonged contact with the above metals may cause corrosion, damaging both the container and potentially contaminating the product. < /p> Strictly implementing the "first-in-first-out" inventory management principle can effectively ensure that the product performs optimally within its best use period. For opened packaging, it should be used up as soon as possible; if it cannot be used up at once, it must be resealed properly and stored under the recommended conditions. < /p> Precautions< /h4> Although this product is not classified as dangerous goods, it is irritating to the skin and eyes (GHS classification: Skin irritation category 2, Eye irritation category 2). The storage area should be equipped with eyewash stations and emergency shower equipment. < /li> In the event of a spill, small spills can be covered with inert absorbent materials (such as sand, vermiculite) and collected in a sealed container; large spills require the construction of containment dikes to control the spread, and the cleaning wastewater must not be directly discharged into sewers or surface water. < /li> The product has a biodegradation rate > 60% (OECD 301 method), but prolonged release into water should still be avoided to prevent minor adverse effects on aquatic ecosystems. < /li> < /ul> Back to FAQ