Isomeric Tridecanol Polyether E-1310 is a high-performance nonionic surfactant (alcohol ethoxylate type). It is GHS classified as Skin Irritation (Category 2), Serious Eye Irritation (Category 2), and Chronic Aquatic Toxicity (Category 3), with the signal word "Warning". During use, personal protective measures and operational procedures must be strictly followed to ensure personnel safety and environmental compliance.
Under normal use conditions, this product is a non-flammable liquid (closed-cup flash point >150°C), with no explosive or oxidizing properties. However, combustion or high-temperature decomposition may produce carbon monoxide, carbon dioxide, and trace amounts of irritating aldehydes and ketones. Operations must ensure well-ventilated premises, with local exhaust ventilation if necessary, to prevent aerosol concentrations from exceeding occupational exposure limits.
The product has good chemical stability and remains structurally stable in acid, alkali, hard water, and electrolyte systems. However, during storage, avoid mixing or contact with incompatible substances such as acids, alkalis, or oxidizers. Packaging containers should be made of stainless steel, polyethylene, or polypropylene; do not use aluminum or uncoated carbon steel containers to prevent corrosion or product contamination.
| Protected Area | Requirement | Description |
|---|---|---|
| Eyes/Face | Chemical safety goggles or full face shield | When there is a risk of splashing, do not replace goggles with ordinary glasses |
| Hands | Chemically resistant protective gloves | Recommended materials: nitrile rubber or neoprene |
| Body | Long-sleeved protective clothing | Contaminated work clothes must be replaced immediately and washed before reuse |
| Respiratory System | Self-priming filter respirator or supplied-air respirator | Wear only when ventilation is insufficient or aerosol concentration may exceed limits |
| Route of Exposure | Emergency Treatment |
|---|---|
| Skin Contact | Immediately remove contaminated clothing and flush thoroughly with plenty of running water and soap for at least 15 minutes. If rash or persistent pain occurs, seek medical attention. |
| Eye Contact | Immediately flush with plenty of running water or saline for at least 15 minutes, turning eyelids and rotating eyes to ensure thorough rinsing. If wearing contact lenses and can be easily removed, remove them and continue rinsing. If irritation persists, seek medical attention promptly. |
| Inhalation | Move the person to fresh air. If breathing is difficult, administer oxygen. If symptoms persist, seek immediate medical attention. |
| Ingestion | Rinse mouth with water (do not induce vomiting unless instructed by medical personnel). Immediately call a poison control center or seek medical attention, and present the product safety data sheet to medical personnel. |
| Storage Parameter | Requirement |
|---|---|
| Storage Environment | Cool, dry, well-ventilated dedicated warehouse |
| Temperature Range | Recommended 5°C to 40°C; avoid extreme high or low temperatures to prevent solidification or excessive thickening |
| Container Seal | Keep tightly sealed to avoid moisture absorption |
| Incompatible Substances | Keep away from acids, alkalis, and oxidizers |
| Isolation Requirement | Keep away from food, beverages, and animal feed |
| Floor Protection | With leak-proof measures and containment facilities |
| Recommended Container Material | Stainless steel, polyethylene, or polypropylene; aluminum or uncoated carbon steel prohibited |