Question

How to store antistatic agent MOA3PK-40? What is the shelf life?

Answer
2026-06-06 官方文档 抗静电剂MOA3PK-40

Antistatic agent MOA3PK-40 should be stored in a cool, dry, and well-ventilated warehouse (5℃~35℃), with a shelf life of 12 months.

Detailed Explanation

Antistatic agent MOA3PK-40 (fatty alcohol polyoxyethylene ether phosphate potassium salt) is an anionic surfactant. Although it has excellent chemical stability, to ensure product performance and safe use, it must be stored strictly under recommended conditions. Under recommended storage conditions, the shelf life of the product is typically 12 months; after the shelf life expires, it must be re-tested and qualified before reuse. Do not directly discard or use expired products without inspection.

Special attention should be paid to temperature control during storage — the recommended storage temperature range is 5℃~35℃, avoiding freezing or long-term storage at high temperatures. Freezing at low temperatures may cause product stratification or precipitation of active ingredients, affecting usage effectiveness; high temperatures may accelerate product degradation or discoloration. Meanwhile, the warehouse should be kept away from heat sources, ignition sources, and direct sunlight. Although this product is a non-flammable liquid (closed cup flash point >100℃), routine fire safety measures should still be taken.

In addition, this product is harmful to aquatic life with long-lasting effects (GHS Aquatic Chronic 3). The storage area must be equipped with spill containment facilities, and the ground should be impermeable to prevent leakage from entering the soil, sewers, or any natural water bodies.

Summary of Storage Requirements

ItemSpecific Requirements
Storage EnvironmentCool, dry, and well-ventilated warehouse; away from heat sources, ignition sources, and direct sunlight
Storage Temperature5℃~35℃ (avoid freezing or long-term storage at high temperatures)
Container RequirementsKeep container tightly closed; use corrosion-resistant, well-sealed packaging (e.g., polyethylene PE drums or stainless steel containers); reseal immediately after opening
Storage ManagementStore separately from incompatible substances such as strong oxidizing agents, strong acids, and strong alkalis; the storage area should have spill containment facilities and impermeable ground surface
Shelf Life12 months (after expiration, must be re-tested and qualified before use)

Application Recommendations

To maximize product performance, it is recommended to follow the "first in, first out" principle and use earlier batches first within the shelf life. During winter storage and transportation, pay attention to freeze protection. If the product becomes turbid or separates due to low temperature, allow it to warm up at room temperature before use and stir well, but do not heat directly. In summer high-temperature seasons, avoid storing the product outdoors or in high-temperature workshops for extended periods.

Precautions

  • Wear chemical protective gloves (e.g., nitrile rubber gloves) and safety goggles during operation; avoid skin and eye contact
  • Dispose of waste product and contaminated containers as hazardous waste; do not discharge into sewers or natural water bodies
  • Regularly check the tightness of storage containers and pipelines to prevent leakage
  • In case of spillage, small amounts can be handled with inert absorbent materials (sand, vermiculite, etc.); large spills require diking and control, and notify professionals for disposal