Question

Precautions for using OPE-108 (opep-108)?

Answer
2026-05-17 官方文档 OPE-108(opep-108)

OPE-108 is a corrosive hazardous substance. Full protective equipment must be worn during operation. Use in a well-ventilated area, and strictly avoid contact with skin, eyes, and discharge into the environment.

Detailed Instructions

OPE-108 (Octylphenol polyoxyethylene ether) is classified as Skin corrosion/irritation Category 1B and Serious eye damage Category 1, may cause severe skin burns and eye damage (H314/H318), and is very toxic to aquatic organisms (H400). Therefore, before using this product, operators must read and understand the safety data sheet. Unauthorized and untrained personnel must not handle it alone.

During operation, wear corrosion-resistant chemical protective gloves, protective clothing, safety goggles/face shield, and use respiratory protection if necessary. The workplace must be well-ventilated, with local exhaust or general ventilation to ensure airborne concentrations are below exposure limits. After operation, hands and exposed skin must be thoroughly washed. Work clothes should be stored separately and washed regularly. Eating, drinking, or smoking is prohibited in the work area.

Although this product is not flammable itself, thermal decomposition may produce toxic and corrosive fumes. Keep away from fire, heat sources, and incompatible materials such as strong oxidizers and strong bases. Use explosion-proof electrical equipment and non-sparking tools. Keep containers tightly closed to prevent leaks.

Storage Conditions

Storage RequirementSpecific Instructions
Storage EnvironmentCool, dry, well-ventilated dedicated hazardous material warehouse, away from residential areas
Temperature ControlNot exceeding 25°C, avoid direct sunlight and heat radiation
Container MaterialCorrosion-resistant material compatible with the original product, e.g., fluorinated polyethylene, polypropylene, etc.
Segregation RequirementsStore separately from oxidizers, alkalis, reactive metals, etc.
Leak Prevention MeasuresSet up spill containment trays or dikes, with corrosion-resistant and impermeable flooring
Warning SignsPlace conspicuous warning signs for "Corrosive" and "Hazardous to the environment"

Emergency Treatment Measures

Type of ContactFirst Aid Measures
Skin ContactImmediately remove contaminated clothing and flush skin with plenty of running water for at least 15 minutes; if burns are evident, continue rinsing and seek medical attention immediately
Eye ContactImmediately lift eyelids and rinse thoroughly with plenty of running water or saline for at least 15 minutes; seek medical attention promptly
InhalationQuickly move to fresh air and maintain an open airway; if breathing is difficult, give oxygen; if breathing stops, perform artificial respiration immediately and seek medical attention
IngestionRinse mouth immediately, do NOT induce vomiting, and urgently transport to hospital; do not give anything by mouth to an unconscious person
Spill HandlingIsolate the spill area, wear protective equipment, use inert materials such as sand, vermiculite to contain and collect, place in a sealed corrosion-resistant container; avoid entry into drains or waterways
Fire FightingFirefighters must wear self-contained breathing apparatus and full protective clothing; use dry powder, carbon dioxide, water spray, alcohol-resistant foam for extinguishing

Precautionary Notes

  • Disposal must comply with hazardous waste regulations; dispose of as corrosive hazardous waste through a licensed facility. Do NOT discharge into drains, soil, or waterways.
  • Packaging containers should be emptied, cleaned, then recycled or destroyed (cleaning solution treated as hazardous waste); do not discard arbitrarily.
  • Control inventory levels and regularly check packaging condition; replace safely if damaged.
  • Carefully reseal containers after opening to maintain tight closure.
  • Highly toxic to aquatic organisms; ensure no leakage into the natural environment.