Question 1

Is OPE-108 (opep-108) harmful to the human body? Does it have an impact on the environment?

Accepted Answer

OPE-108 (opep-108) has clear corrosive and irritant hazards to the human body, and is highly toxic to the aquatic ecological environment. It is a hazardous chemical requiring strict control. Detailed Explanation OPE-108 (Octylphenol ethoxylate) is classified under the GHS chemical classification system as Skin corrosion/irritation Category 1B and Serious eye damage/eye irritation Category 1. This means the product can cause severe skin burns (H314) and irreversible eye damage (H318). After contact, irritation may occur immediately, and in severe cases, it can lead to tissue necrosis and permanent visual impairment. Therefore, when handling, corrosion-resistant chemical protective gloves, protective clothing, and safety goggles/ce shields must be worn to avoid any form of skin and eye contact. In terms of the environment, OPE-108 is classified as Hazardous to the aquatic environment - Acute Hazard Category 1 (H400), indicating that the substance is extremely toxic to aquatic life, and even at low concentrations may cause lethal effects on fish, algae, and other aquatic organisms. The product degrades relatively slowly in the natural environment, and its degradation intermediates (e.g., octylphenol) may have endocrine disrupting activity, posing risks of bioaccumulation and biomagnification along the food chain. Therefore, it is strictly prohibited to discharge this product or its waste liquid into sewers, soil, or natural water bodies. During use and storage, maintain good ventilation, keep away from ignition sources and heat sources, and store separately from incompatible substances such as strong oxidizers and strong bases. In case of skin or eye contact, rinse immediately with plenty of running water for at least 15 minutes and seek medical attention promptly. Disposal must be handled by qualified hazardous waste treatment units, and must not be discarded arbitrarily. Toxicity Parameter Summary Hazard CategoryGHS ClassificationHazard CodeHazard Statement Skin corrosion/irritationCategory 1BH314Causes severe skin burns and eye damage Serious eye damage/eye irritationCategory 1H318Causes serious eye damage Acute aquatic hazardCategory 1H400Very toxic to aquatic life Safety Protection Recommendations Personal Protection: Wear corrosion-resistant chemical protective gloves, protective clothing, safety goggles/ce shields during operation, and use respiratory protection if necessary. Engineering Controls: Use in well-ventilated areas, employ local exhaust or general ventilation to maintain air concentrations below exposure limits. Environmental Protection: It is strictly prohibited to discharge the product or waste liquid containing the product into sewers, water bodies, or soil. Leaks should be contained using inert absorbent materials and collected for disposal by qualified units. Storage Requirements: Store in a cool, dry, well-ventilated dedicated hazardous goods warehouse, with temperature not exceeding 25°C, avoid direct sunlight, and keep containers tightly closed. Precautions This product is not flammable itself, but thermal decomposition may produce toxic and corrosive fumes. Firefighters must wear self-contained breathing apparatus and full-body protective clothing. In the event of fire, use dry powder, carbon dioxide, water spray, or alcohol-resistant foam; avoid using straight water jets on the leaked material. Before operation, be sure to read and understand the complete Safety Data Sheet (SDS). Do not operate this product alone without training.

Question 2

What to do if problems occur during the use of OPE-108 (OPEP-108)? How to get technical support?

Accepted Answer

If problems occur during the use of OPE-108, it is recommended to immediately stop operation and perform emergency treatment according to safety instructions, while contacting the sales or technical representative of Haian Guoli Chemical Co., Ltd. for professional support. Common problem self-check and troubleshooting directions During the use of OPE-108 (Octylphenol Polyoxyethylene Ether), abnormal performance is usually related to system compatibility, process conditions, or storage status. According to Guoli Chemical's product data, you can first self-check the following common situations: Emulsification/dispersion effect not as expected: Check HLB value matching (this product has an HLB value of 13.5), confirm whether there are strong electrolytes or extreme pH environments in the system. Although this product is resistant to acids, alkalis, and hard water, extreme conditions still need to verify compatibility. Cloudiness or stratification: Check if the storage temperature exceeds 25°C for a long time. The cloud point of this product is 61~67°C (1% aqueous solution), but long-term high-temperature storage may affect stability. If appearance changes due to low temperature in winter, warm to room temperature and stir evenly before use. Abnormally high foam: This product is a low-foaming tendency product (foam height approximately 110mm/5min after 85mm by Ross-Miles method at 0.25% aqueous solution). If foam is too high, check for cross-contamination from other raw materials or excessive usage concentration. Poor compatibility with other components: This product has strong compatibility, but should avoid contact with strong oxidizing agents, strong alkalis, and active metals. Emergency treatment (prioritize when personal safety is involved) OPE-108 is classified as skin corrosion/irritation Category 1B and serious eye damage Category 1 hazardous substance. If personal contact occurs, the following measures must be taken immediately: Skin contact: Immediately remove contaminated clothing, rinse with plenty of running water for at least 15 minutes. If burns are obvious, continue rinsing and seek medical attention immediately. Eye contact: Immediately lift the eyelids, rinse thoroughly with plenty of running water or normal saline for at least 15 minutes, and seek medical attention promptly. Inhalation: Quickly move to fresh air, keep airway unobstructed. If breathing difficulty occurs, seek medical attention immediately. Leak treatment: Wear protective equipment, use inert materials such as sand to contain and collect, place in a sealed corrosion-resistant container, avoid entry into sewers. How to contact Guoli Chemical for technical support Haian Guoli Chemical Co., Ltd. is the original technology source for this product, providing the most authoritative formula guidance, application debugging, and ult analysis services. It is recommended to contact through the following methods (Note: For specific contact information, please visit the official website of Guoli Chemical or refer to the product Safety Data Sheet SDS): When calling or emailing, to help technicians quickly locate the problem, please prepare the following information in advance: Product batch number (batch number on the packaging drum label) and purchase date Detailed description of the problem phenomenon (e.g., specific temperature at which cloudiness occurs, type and ratio of medium where emulsification ils) Names and approximate ratios of other chemicals used together with this product in the formula system Process conditions (e.g., mixing temperature, stirring speed, addition order) Storage conditions and actual storage duration Time point and frequency of problem occurrence Technical parameters The following are key technical parameters of OPE-108 for reference during problem diagnosis (data source: Guoli Chemical product database): Parameter itemValue AppearanceColorless to light yellow transparent liquid Ion typeNonionic surctant HLB value13.5 Cloud point (1% aqueous solution)61~67°C Active content≥99% pH value (1%/5% aqueous solution)6.0~8.0 Pour point Kinematic viscosity (25°C)250 mm²/s Surce tension (25°C, 1% aqueous solution)29~30 mN/m Critical micelle concentration CMC (25°C)0.26 mmol/L Penetration power (0.5% solution, standard canvas method)≤60 seconds Notes Read and understand the product SDS before operation, and wear protective equipment (chemical protective gloves, goggles, protective clothing). Maintain good ventilation during use, and keep away from incompatible substances such as strong oxidizing agents. Waste disposal must be carried out by qualified units in accordance with local hazardous waste regulations, and discharge into water bodies is prohibited. The above technical parameters are typical ctory values. Specific batches may vary slightly. Please refer to the ctory COA for actual values.

Question 3

How to purchase OPE-108 (opep-108)? What is the minimum order quantity?

Accepted Answer

To purchase OPE-108, please contact the sales team of Haian Guoli Chemical Co., Ltd. directly. The minimum order quantity is usually based on the minimum packaging specification (50kg plastic drum), but details need to be confirmed with the sales team. Detailed Description OPE-108 (Octylphenol Polyoxyethylene Ether, CAS No.: 121809-82-3) is one of the core non-ionic surctant products of Guoli Chemical, currently in normal production and sales. According to the product database, this product is available in three standard packaging specifications: 50kg plastic drum, 200kg plastic drum, and IBC tote tank, meeting different procurement needs from small-scale trials, pilot tests to large-scale industrial production. The database does not explicitly list a fixed minimum order quantity (MOQ), but typically, the minimum order is one drum, i.e., 50kg is the minimum purchase unit. If you are purchasing for the first time for sample testing or small batch trials, it is recommended to communicate directly with the sales team to request samples or small packaging supply solutions. The product price is marked as "Price negotiable." The actual transaction price is affected by ctors such as order quantity, payment method, transportation distance, etc., and shall be subject to the final quotation from the sales team. Contact Information and Procurement Process The procurement process is suggested as follows: Step 1: Clarify your needs (purpose, estimated quantity, packaging preference) and contact the sales department of Haian Guoli Chemical Co., Ltd. directly. Step 2: Communicate with the sales consultant to confirm price, MOQ, delivery time, and transportation method, and request the Safety Data Sheet and quality inspection report. Step 3: Confirm the order and sign the purchase and sales contract, arrange payment and shipment. Packaging Specification Parameters Packaging TypeSpecificationApplicable Scenario Plastic drum50kg\/drumSmall-scale trial, sample, small batch production Plastic drum200kg\/drumMedium batch regular procurement IBC tote tankApprox. 1000kg\/tankLarge batch industrial production Precautions OPE-108 is classified as Skin corrosion\/irritation Category 1B and Serious eye damage Category 1, and is toxic to aquatic life. Before purchasing, please ensure that your unit has safe storage conditions for hazardous chemicals (cool, dry, ventilated, temperature ≤25°C). Operators must wear corrosion-resistant protective gloves, goggles, and protective clothing. Transportation must comply with relevant hazardous goods regulations. Please confirm with the sales team in advance regarding freight costs and hazardous chemical transport qualification requirements.

Question 4

Does OPE-108 (opep-108) meet environmental requirements? Can a test report be provided?

Accepted Answer

OPE-108 is not an environmentally friendly product. It is extremely toxic to aquatic life (acute toxicity Category 1), and its use and disposal must strictly comply with environmental regulations. Detailed Explanation According to the safety data in the national chemical product database, OPE-108 (octylphenol polyoxyethylene ether) is clearly classified as "Hazardous to the aquatic environment - acute hazard, Category 1" (H400), meaning it is extremely toxic to aquatic organisms. This means that once the product enters natural water bodies, even a trace leak can cause serious harm to fish, algae, and other aquatic life. Therefore, from an environmental perspective, OPE-108 does not meet the standards of "green" or "environmentally friendly" products. Additionally, OPE-108 belongs to the alkylphenol polyoxyethylene ether (APEO) surctant category. These substances degrade slowly in the environment, and their degradation products (such as octylphenol) have endocrine-disrupting effects that may interfere with the endocrine systems of aquatic organisms. The EU REACH regulation has listed octylphenol in the Candidate List of Substances of Very High Concern (SVHC), imposing strict restrictions and notification requirements on products containing such substances. If your products are intended for export markets (especially the EU), special attention must be paid to regulatory compliance. Regarding test reports, the product database currently does not include third-party test reports for OPE-108. If you require SGS test reports, RoHS\/REACH compliance declarations, MSDS, or product COA (Certificate of Analysis), it is recommended to directly contact the sales or technical department of Haian Guoli Chemical Co., Ltd. to obtain them. Typically, manucturing enterprises can provide batch-specific ctory test reports or arrange specialized test reports from third-party institutions based on customer needs. Overview of Key Environmental Indicators Environmental IndicatorAssessment ResultExplanation Aquatic Acute ToxicityCategory 1 (H400)Extremely toxic to aquatic life BiodegradabilityPoorAPEOs degrade slowly; metabolites pose environmental hormone risks REACH ComplianceRestricted SubstanceOctylphenol is included in the SVHC Candidate List Skin\/Eye IrritationCategory 1BCauses severe skin burns and eye damage (H314\/H318) VOC VolatilityLowLow volatility at room temperature, but ventilation is still required Application Recommendations Given the environmental risks of OPE-108, the following control measures are recommended during use: Waste Liquid Treatment: Wastewater containing OPE-108 generated during production must be collected and disposed of by qualified hazardous waste treatment units. Discharge directly into sewers or natural water bodies is strictly prohibited. Formulation Substitution: If the end market has high environmental requirements (e.g., exports to the EU, green certification products), consider inquiring with Guoli Chemical about environmentally friendly alternatives, such as tty alcohol polyoxyethylene ether (AEO series) or isomeric alcohol ether series, which have better biodegradability and no APEO restrictions. Compliance Documentation: For export products, prepare REACH compliance declarations, SDS, and third-party test reports when necessary. Precautions During operation, wear corrosion-resistant protective gloves, goggles, and protective clothing to prevent skin and eye contact. The storage area should be equipped with leak-proof trays or containment dikes, and the floor must be corrosion-resistant and impermeable. Leaks should be contained and collected using inert materials such as sand or vermiculite, placed in sealed corrosion-resistant containers, and treated as hazardous waste. To obtain test reports for specific batches, please contact the sales department of Guoli Chemical directly (the product database currently does not include electronic versions of test reports).

Question 5

What are the advantages of OPE-108 (opep-108) compared to similar products?

Accepted Answer

OPE-108, with its optimized EO chain and HLB 13.5 design, demonstrates more balanced industrial application advantages in emulsification, dispersion, low foam, and acid/alkali resistance compared to many similar octylphenol ethoxylates. Detailed Explanation Compared to common OP series nonionic surctants, OPE-108 (n≈8-10) has a precisely positioned hydrophilic-lipophilic balance (HLB 13.5), giving it both excellent water solubility and strong emulsifying ability for organic oil phases. Many low-EO (e.g., n=4-6) products have strong penetration but insufficient water solubility, while high-EO (n>15) products have good water solubility but reduced emulsifying power and higher foam. OPE-108 lls exactly in this balanced range, enabling it to achieve multiple functions of wetting, emulsification, and dispersion with a single additive in media such as paint pastes, industrial cleaning agents, and adhesives, thereby reducing formulation complexity and cost. In terms of process operation performance, the cloud point (61-67°C) and low foam tendency (initial foam height approx. 110 mm, drops to approx. 85 mm after 5 minutes) of OPE-108 make it especially suitable for spray, curtain coating, and high-speed stirring processes that require rapid defoaming. In contrast, many traditional nonionic surctants (e.g., certain NP/TX series) have more stable foam and longer defoaming time, which can easily cause bubbles or overflow issues during application. Additionally, OPE-108 has better resistance to hard water, acids, and alkalis than some ester or amide surctants, allowing it to maintain phase stability in metalworking fluids and neutral or weakly alkaline cleaning agents for extended periods, without forming calcium soap precipitates. From the perspective of application breadth, the product specification of OPE-108 clearly indicates its dual functions of internal and external lubrication and pigment dispersion in plastics/rubber, its use as a wetting agent to enhance intercial bonding strength in composites, and its spreading and cleaning power in polishing care products. This "multi-functional single agent" characteristic enables it to systematically improve the processing performance and appearance quality of products compared to single-function lubricants or dispersants (e.g., pure waxes, stearates). Technical Parameters Typical Differences Comparison between OPE-108 and Similar Octylphenol Ethoxylates Comparison Item OPE-108 (Guoli Chemical) Similar Low-EO Products (n≈4-6, Example) Similar High-EO Products (n≈15-20, Example) EO Addition Number (n) ≈8-10 Low (≈4-6) High (≈15-20) HLB Value 13.5 Approx. 10-12 Approx. 15-17 Water Solubility (25°C) Easily soluble, forms clear solution Disperses to microemulsion, may appear cloudy Very easily soluble Emulsifying Power (for mineral oil/aromatic) High Medium-High Medium Wetting Penetration (Canvas Sinking) Good (≤60 sec, 0.5%) Excellent (can be Average (may be >120 sec) Foam (Ross-Miles, 0.25%, 25°C) Initial 110 mm, 5 min 85 mm (low foam tendency) Relatively low, quick foam break Relatively high, stable foam Cloud Point (1% Aqueous Solution) 61~67 °C Below room temperature or cloudy ≥ 90 °C Acid/Alkali & Hard Water Resistance Excellent, broad compatibility Good Good Active Content ≥ 99% Most commercial products 98-99% Most commercial products >99% or contain water Applicable Temperature Range (Process) Broad, good from room temp to moderate Prefer low temperature processes Prefer moderate to high temperature processes Note: Data for similar products are typical ranges, depending on manucturer and batch. OPE-108 parameters are from Guoli Chemical product database. Application Suggestions Paints

Question 6

How should OPE-108 (opep-108) be stored? What is the shelf life?

Accepted Answer

OPE-108 should be stored sealed in a cool, dry, and well-ventilated environment at a temperature not exceeding 25°C, away from direct sunlight and heat sources. Under proper storage conditions, the shelf life is typically 12-24 months, with the specific period based on the product packaging labeling. Detailed Explanation OPE-108 (Octylphenol Polyoxyethylene Ether) is a nonionic surctant with relatively stable chemical properties. However, to ensure product performance and safety in use, it must be managed in strict accordance with hazardous material storage regulations. This product is classified as Skin Corrosion/Irritation Category 1B and Serious Eye Damage Category 1, and it is also acutely toxic to aquatic life. Therefore, the storage area must have clear warning signs for "corrosive substance" and "harmful to the environment". The choice of storage container material is crucial. It is recommended to use original packaging or corrosion-resistant materials compatible with the product (such as fluorinated polyethylene, polypropylene, etc.). The packaging must be kept sealed and intact; after opening, it should be carefully resealed to prevent the product from absorbing moisture or reacting with impurities in the air. The storage area should be equipped with spill-proof trays or dikes, and the floor must be corrosion-resistant and impermeable to handle potential leaks. Regarding the shelf life, the product database does not currently provide official shelf life data for this product. Generally speaking, for nonionic surctant products, under strict adherence to the above storage conditions, the shelf life from the date of manucture is typically 12-24 months. It is recommended that users refer to the expiration date stated on the product packaging or the Certificate of Analysis (COA) and manage inventory following the first-in, first-out principle. Regularly inspect the packaging condition; if damage, leakage, or abnormal product appearance (such as significant color darkening, stratification, or turbidity) is found, the product should be handled accordingly and not used further. Summary of Storage Conditions Storage ElementSpecific Requirements Storage EnvironmentCool, dry, well-ventilated dedicated hazardous material warehouse, away from residential areas Temperature ControlNot exceeding 25°C, avoid direct sunlight and heat radiation Container MaterialOriginal packaging or corrosion-resistant materials such as fluorinated polyethylene, polypropylene Packaging ConditionKeep sealed and intact; after opening, carefully reseal Isolation RequirementsStore separately from incompatible substances such as oxidizers, alkalis, active metals, etc. Safety cilitiesSpill-proof trays or dikes, corrosion-resistant and impermeable floor, clear warning signs Inventory ManagementControl inventory levels, regularly inspect packaging condition, follow first-in, first-out principle Application Recommendations Before each use of OPE-108, it is recommended to first check the product appearance — the normal state should be a colorless to light yellow transparent liquid. If turbidity, stratification, obvious color darkening, or precipitate formation is observed, it may indicate that the product has deteriorated and should be discontinued. After use, immediately seal the container to minimize the product's exposure to air and prevent moisture absorption or contamination. Precautions This product is very toxic to aquatic life (H400). The storage area should be kept away from drains and water sources to prevent accidental leakage from causing environmental pollution. Empty packaging should be emptied and rinsed (rinsing liquid should be treated as hazardous waste) and disposed of by a qualified hazardous waste treatment unit; do not discard arbitrarily or discharge into sewers. Products beyond the shelf life should not be used directly, even if the appearance appears unchanged, as performance may have degraded. It is recommended to contact the supplier to confirm whether the product can still be used or if waste disposal is necessary.

Question 7

What safety precautions should be taken when using OPE-108 (opep-108)?

Accepted Answer

When using OPE-108, be highly vigilant about its strong corrosivity and environmental hazards. Strictly wear protective equipment and follow safety procedures during operation. Detailed Description OPE-108 (octylphenol ethoxylate) is classified as Skin corrosion/irritation Category 1B and Serious eye damage Category 1, indicating that this product can cause severe skin burns and irreversible eye damage. Additionally, it is highly toxic to aquatic life (Hazardous to the aquatic environment - acute hazard category 1), and if it enters water bodies, it can cause severe damage to the ecological environment. Therefore, every aspect from personal protection to environmental protection must not be overlooked. Before operation, be sure to read and understand the Safety Data Sheet (SDS). Untrained personnel must not operate alone. The workplace should be well-ventilated; it is recommended to use local exhaust or general ventilation systems to ensure that airborne concentrations are always below occupational exposure limits. Eating, drinking, and smoking are strictly prohibited during operation. Keep away from ignition sources, heat sources, and incompatible materials such as strong oxidizers and strong bases. In case of skin or eye contact, immediately flush with plenty of flowing water for at least 15 minutes and seek medical attention as soon as possible. If ingested, do not induce vomiting; rinse the mouth immediately and seek emergency medical care. Spills should be contained and collected with inert absorbent materials such as sand, vermiculite, etc., to prevent entry into drains or water bodies. Residual material should be neutralized with dilute alkali solution and disposed of according to regulations. Summary of Safety Protection Points Protection CategorySpecific Requirements Hand ProtectionWear corrosion-resistant chemical protective gloves Eye/ce ProtectionWear safety goggles or full ce shield to prevent splashes Body ProtectionWear chemically resistant protective clothing Respiratory ProtectionUse respiratory protection equipment in case of insufficient ventilation Engineering ControlsLocal exhaust or general ventilation, use explosion-proof electrical equipment and non-sparking tools Storage and Disposal Requirements Storage conditions: Store in a cool, dry, well-ventilated dedicated hazardous goods warehouse, with temperature controlled below 25°C, and avoid direct sunlight. Container materials must be compatible with the product; it is recommended to use original packaging or corrosion-resistant materials such as fluorinated polyethylene or polypropylene. The storage area should be equipped with spill containment trays or dikes, the floor should be corrosion-resistant and impervious, and clearly marked with "Corrosive" and "Hazardous to the environment" warning signs. Store separately from oxidizers, alkalis, active metals, etc., and regularly check the packaging condition. Disposal: This product, as a corrosive hazardous waste, must be handled by a qualified professional unit. It is strictly prohibited to discharge it into sewers, soil, or any water bodies. Empty packaging containers should be thoroughly cleaned, and the cleaning liquid should also be treated as hazardous waste and not discarded at will. Special Precautions Although this product is not easily flammable itself, thermal decomposition may produce toxic and corrosive fumes. Firefighters must wear self-contained breathing apparatus and full-body protective clothing. For fire extinguishing, prefer dry powder, carbon dioxide, water spray, or alcohol-resistant foam. Avoid using straight water streams on the spilled material. After operation, thoroughly wash hands and exposed skin. Work clothes should be stored separately and washed regularly. The product is highly toxic to aquatic life (H400). Prevent any leakage from entering environmental water bodies.

Question 8

How to use OPE-108 (opep-108)? What is the recommended dosage?

Accepted Answer

OPE-108 is a non-ionic surctant. The specific dosage varies depending on the application system. Generally, it is recommended to be between 0.1% and 5% of the total formulation, and the optimal amount should be determined through experiments. Detailed Description OPE-108 (octylphenol polyoxyethylene ether) is a non-ionic surctant with an HLB value of about 13.5. It is easily soluble in water and various organic solvents. Its molecular structure contains about 8-10 ethylene oxide (EO) segments, giving the product excellent emulsifying, wetting, and dispersing capabilities. In practical applications, OPE-108 can be directly added to the aqueous or oil phase with stirring, or gradually added during mixing to ensure full dispersion and optimal performance. Since OPE-108 is a high-concentration liquid (active content ≥99%), it maintains good fluidity even at low temperatures (pour point Although this product is non-ionic and has good compatibility, it should be noted that it is classified as skin corrosion/irritation category 1B and serious eye damage category 1. Personal protective equipment must be strictly worn during operation to avoid direct contact. Technical Parameters ItemSpecification AppearanceColorless to light yellow transparent liquid Ionic typeNon-ionic HLB value13.5 Active content≥99% Cloud point (1% aqueous solution)61~67°C pH value (1% aqueous solution)6.0~8.0 Density (20°C)1.06 g/cm³ Viscosity (25°C)250 mPa·s Surce tension (25°C, 1% aqueous solution)29~30 mN/m Penetrating power (0.5% solution, standard canvas method)≤60 seconds Pour point Packaging50kg plastic drum, 200kg plastic drum, IBC tote Note: The above data are from the product database of Guoli Chemical. Application Suggestions Based on different application fields, the recommended reference dosages are as follows (based on total formulation weight): Paint and Ink: 0.1%~1.0%. Used as a wetting dispersant or anti-abrasion additive, it can be added during the grinding stage to improve pigment dispersion and coating leveling. Plastic and Rubber Processing: 0.2%~1.5%. Used as an internal lubricant or dispersion aid, it is mixed with resin pellets before processing to reduce melt viscosity and improve mold release. Adhesives and Hot Melt Adhesives: 0.5%~2.0%. Adjusts open time and melt viscosity, improving intercial wetting and bonding strength. Composite Materials and Fiber Treatment: 0.5%~3.0% (concentration of sizing working solution). Used as a sizing agent for glass fiber and carbon fiber to promote resin penetration. Polishing and Care Products: 1.0%~5.0%. Provides spreadability and cleaning power, forming a high-gloss protective layer. Printing Ink: 0.2%~1.0%. Improves anti-blocking properties and rub resistance. The above are industry experience reference ranges. The actual optimal dosage should be determined through formulation experiments. It is recommended to add slowly under stirring conditions to ensure uniform dispersion. Precautions Safety Protection: This product is severely corrosive to skin and eyes. Must wear chemically resistant gloves, protective clothing, and goggles/ce shield during operation. Ventilation Requirements: Use in a well-ventilated area, and equip with local exhaust ventilation if necessary. Storage Conditions: Store at a temperature not exceeding 25°C, avoid direct sunlight, keep container sealed, and isolate from strong oxidizers and strong bases. Environmental Requirements: Highly toxic to aquatic life. Do not discharge waste liquid into drains or water bodies. Waste disposal must be handled by qualified units.

Question 9

In which industries and processes is OPE-108 (octylphenol ethoxylate) mainly applied?

Accepted Answer

OPE-108 (octylphenol ethoxylate) is a general-purpose nonionic surctant widely used in six major industries: coatings and inks, plastics and rubber, adhesives, composite materials, polishing and care products, and printing inks. It plays a key role in processes such as emulsification, wetting, dispersion, lubrication, and interce modification. Detailed Description OPE-108 (octylphenol ethoxylate) is a high-performance nonionic surctant with CAS number 121809-82-3, appearing as a colorless to light yellow transparent liquid. Its core advantage lies in its excellent emulsifying, wetting, and dispersing capabilities, along with resistance to acids, alkalis, and hard water, maintaining stable surce activity under demanding process conditions. Furthermore, this product exhibits low foaming tendency, is easy to handle, and shows good compatibility with various resin systems and additive systems, making it a widely adopted general-purpose additive in industrial formulations. From a functional perspective, OPE-108 primarily serves five roles in various processes: as an emulsifier, effectively reducing oil-water intercial tension to form stable emulsions; as a wetting agent, significantly improving the spreading and penetration of liquids on solid substrates; as a dispersant, cilitating the uniform distribution and stable suspension of pigments and fillers in media; as a lubricant, reducing melt viscosity and improving processing flowability and mold release; and as a softening agent/leveling agent, imparting a smooth and delicate feel to material surces. These functions make it highly flexible and irreplaceable in cross-industry applications. Application Suggestions IndustryProcess/ApplicationFunctional Role Coatings and InksAbrasion resistant agents, anti-scratch additives, matting agents, anti-settling agentsImprove coating surce hardness and smooth feel, enhance pigment dispersion and system storage stability Plastics and RubberLubrication in PVC and polyolefin processing; pigment dispersion in masterbatchesInternal and external lubricant, reduce melt viscosity, improve mold release and color uniformity Adhesives and Hot Melt AdhesivesOpen time adjustment, melt viscosity control, thermal resistance optimizationRegulate rheological properties and intercial wetting, enhance bonding reliability and application window Composite MaterialsGlass fiber/carbon fiber wetting treatment, fiber surce modificationPromote resin penetration and encapsulation of reinforcing fibers, reduce intercial voids and defects Polishing and Care ProductsPolishing waxes, automotive care, floor care formulationsImpart spreadability and cleaning power, form high-gloss protective layer, enhance hydrophobic and anti-soil properties Printing InksAnti-blocking treatment, improved rub resistancePrevent printed items from sticking together, ensure clarity of patterns and quick drying Precautions Safety Risks: This product is classified as skin corrosion/irritation category 1B and serious eye damage category 1, and is highly toxic to aquatic life (H400). Must wear corrosion-resistant chemical protective gloves, goggles/ce shield, and protective clothing during operation to avoid skin and eye contact. Ventilation Requirements: Use in well-ventilated areas; local exhaust or general ventilation is recommended to ensure airborne concentrations stay below exposure limits. Storage Conditions: Store in a cool, dry, well-ventilated dedicated warehouse at temperatures not exceeding 25°C, away from direct sunlight and incompatible substances such as strong oxidizers and strong alkalis. Disposal: As a corrosive hazardous waste, must be disposed of by qualified units; do not discharge into sewers, soil, or water bodies. Emergency Measures: In case of skin contact, flush immediately with plenty of running water for at least 15 minutes; for eye contact, thoroughly rinse under open eyelids and seek medical attention promptly.

Question 10

What are the physicochemical technical parameters of OPE-108 (opep-108)?

Accepted Answer

The physicochemical technical parameters of OPE-108 comprehensively cover basic physical properties, surce activity indicators, and stability data. It is an octylphenol polyoxyethylene ether nonionic surctant with an HLB value of 13.5. Detailed Description OPE-108 (CAS number: 121809-82-3) has the chemical name octylphenol polyoxyethylene ether, molecular formula C8H17C6H4O(CH2CH2O)nH (where n≈8-10), and molecular weight approximately 646. The product appears as a colorless to light yellow transparent liquid, belonging to the nonionic surctant type, with active matter content ≥99%, easily soluble in water and organic solvents, chemically stable at room temperature, resistant to acid, alkali, and hard water, with strong compatibility. It exhibits high surce activity in water, with a surce tension of only 29~30 mN\/m for a 1% aqueous solution, a critical micelle concentration (CMC) as low as 0.26 mmol\/L, a cloud point of 61~67°C, excellent penetrating power (standard canvas method ≤60 seconds), and moderate foamability, making it a low-foaming product. These comprehensive properties make it perform excellently in fields such as coatings, inks, plastics, adhesives, and composite materials. Technical Parameters Parameter Item Indicator \/ Value Test Condition CAS Number121809-82-3— AppearanceColorless to light yellow transparent liquidVisual Ionic TypeNonionic— pH Value6.0~8.01% aqueous solution \/ 5% aqueous solution Active Matter Content≥99%— Water Content≤0.5%— HLB Value13.5— Density1.06 g\/cm³20°C (Data source: Guoli Chemical) Kinematic Viscosity250 mm²\/s25°C (Data source: Guoli Chemical) Refractive Index1.4920°C (Data source: Guoli Chemical) Flash Point>150°C (Closed Cup)— Pour Point— Cloud Point61~67°C1% aqueous solution Surce Tension29~30 mN\/m25°C, 1% aqueous solution Critical Micelle Concentration (CMC)0.26 mmol\/L25°C (Data source: Guoli Chemical) Hydroxyl Value85~90 mgKOH\/g— Acid Value≤0.5 mgKOH\/g— Saponification Value≤2 mgKOH\/g— Iodine Value≤1 gI₂\/100g— FoamabilityInitial approximately 110mm \/ after 5min approximately 85mm0.25%, 25°C, Ross-Miles method Penetrating Power≤60 seconds0.5% solution, standard canvas method Free Alcohol≤1%— Heavy Metals (as Pb)≤20 mg\/kg— Arsenic (As)≤2 mg\/kg— Application Suggestions Due to OPE-108's excellent emulsifying, wetting, and dispersing capabilities, as well as its resistance to acid, alkali, and hard water, it is recommended for use in the following scenarios: (1) As an efficient wetting and dispersing agent for water-based coatings and printing inks, significantly improving pigment dispersion and film leveling; (2) In the processing of PVC, polyolefins, and other plastics, as an internal lubricant and mold release agent to reduce melt viscosity; (3) In adhesive and hot melt adhesive systems, to adjust open time and intercial wettability. It is recommended to determine the optimal addition amount through experiments based on the specific formulation, with a reference range of 0.1%~1.0% of the total system weight. Precautions Strong Corrosivity: This product is classified as Skin Corrosion\/Irritation Category 1B and Serious Eye Damage Category 1. Corrosion-resistant gloves, goggles, and protective clothing must be worn during operation. Environmental Hazard: This product is very toxic to aquatic life (H400). Do not discharge waste liquid directly into sewers or water bodies. Waste disposal must be handed over to qualified units. Storage Requirements: Storage temperature should be ≤25°C, protected from light, dry, and well-ventilated, isolated from incompatible substances such as strong oxidizers and strong alkalis. Stability: Chemically stable at room temperature, but thermal decomposition may produce toxic and corrosive fumes. Keep away from heat sources and ignition sources.

Property	Value
CAS No.	121809-82-3
Molecular Formula	C8H17C6H4O(CH2CH2O)nH, n≈8-10
Appearance	Colorless to pale yellow transparent liquid
Ionic Type	Nonionic
Avg. Molecular Weight	Approx. 646
Cloud Point	61~67°C (1%aq. soln.)
Active Content	≥99
pH Value(1%)	6.0~8.0
pH Value(5%)	6.0~8.0
Iodine Value	≤1 gI₂/100g
Solubility	Readily soluble in water and organic solvents
Surface Tension	29~30 mN/m (25°C, 1%aq. soln.)
CMC	0.26 mmol/L (25℃)
Acid Value	≤0.5 mgKOH/g
Saponification Value	≤2 mgKOH/g
Hydroxyl Value	85~90 mgKOH/g
Moisture	≤0.5
Density	1.06 g/cm³ (20°C)
Kinematic Viscosity	250 mm²/s (25°C)
Refractive Index	1.49 (20°C)
Flash Point	>150°C (closed cup)
Hygroscopicity	Hygroscopic
Chemical Stability	Stable at room temperature; avoid contact with strong oxidizers
Penetration	≤60 s (0.5% aq., standard canvas disc)
Foam Property	~110 mm initial, ~85 mm after 5 min (0.25%, 25°C, Ross-Miles)
Alkali Resistance	Alkali resistant; stable under normal alkaline conditions
Unsaturation	0 mmol/kg
Viscosity	250 mPa·s (25℃)
Melting Point	<-5°C (pour point)
Low Shear Viscosity	250 mPa·s (25℃)
Solid Content	≥99%
Free Alcohol	≤1%
Heavy Metal	≤20 mg/kg (as Pb)
Arsenic	≤2 mg/kg

OPE-108 (OPEP-108)

Product Details

Applications

Properties

Safety

Product Overview

Performance Features

Packaging and Storage

Phosphate Ester / Penetrant Applications

Product Properties

Safety

GHS

Handling

Storage

First Aid

Related Products

OPE-108 (OPEP-108)

Product Details

Applications

Properties

Safety

Product Overview

Performance Features

Packaging and Storage

Phosphate Ester / Penetrant Applications

Product Properties

Safety

GHS

Handling

Storage

First Aid

Related Products

Premium Polyether F-6

OPE-105 (OPEP-105)

Polyether F-68

Polyether F-38

Polyether L-35