PEG-1000/1500 is a low-toxicity nonionic polyethylene glycol product that is relatively safe for humans under normal use conditions. However, according to the GHS classification under the EU CLP regulation, this product is classified as a skin irritant (Category 2), eye irritant (Category 2), and a substance that may cause respiratory irritation (Category 3). Therefore, strict adherence to safe operating procedures is necessary during use to prevent potential health risks.
Operations should always be carried out in well-ventilated areas or places equipped with effective local exhaust ventilation to avoid generating and inhaling dust or vapors. Appropriate personal protective equipment must be worn, including chemical safety goggles and protective gloves (nitrile or neoprene gloves recommended). Avoid contact of the product with skin, eyes, and clothing during operation. Eating, drinking, and smoking are strictly prohibited in the work area. After operation, immediately remove contaminated work clothing and thoroughly wash exposed skin.
In case of accidental eye contact, rinse immediately with plenty of water and seek medical advice (corresponding to safety phrase S26). Prolonged direct skin contact may cause mild skin irritation; contact with eyes may cause eye discomfort. When used extensively in confined or poorly ventilated areas, appropriate ventilation measures are recommended to reduce potential respiratory irritation. For detailed safety information, please refer to the Safety Data Sheet (SDS).
| Classification | Category | Hazard Statement |
|---|---|---|
| Skin corrosion/irritation | Category 2 | H315: Causes skin irritation |
| Serious eye damage/eye irritation | Category 2 | H319: Causes serious eye irritation |
| Specific target organ toxicity - single exposure | Category 3 | H335: May cause respiratory irritation |
Skin contact: Remove contaminated clothing and wash the affected area with plenty of water and soap. If irritation persists, seek medical advice.
Eye contact: Immediately flush with plenty of water for at least 15 minutes, lifting eyelids to ensure thorough rinsing. Seek immediate medical attention.
Inhalation: Move the person to fresh air and keep airway clear. If discomfort persists, seek medical advice.
Spill handling: Collect solid material and place in a closed container, avoid dust generation, and dispose of according to local regulations.
Note: The above information is based on product data from Guoli Chemical and general safety standards. For more detailed toxicological and ecological data, please refer to the Safety Data Sheet (SDS).