Question

What safety precautions should be taken when using PEG600DO, Polyethylene Glycol 600 Dioleate?

Answer
2026-06-06 官方文档 PEG600DO,聚乙二醇600双油酸酯

PEG600DO is classified as low-toxicity and non-hazardous chemical, but attention should still be paid to its mild irritating effects on skin and eyes. Basic protective measures should be taken during handling.

Detailed Description

PEG600DO (Polyethylene Glycol 600 Dioleate) is not classified as a hazardous chemical according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). Its oral (rat) LD50 is > 5000 mg/kg, indicating it is a practically non-toxic substance. The flash point is above 150°C (closed cup), and it presents no risk of flammability, carcinogenicity, mutagenicity, or reproductive toxicity. Under normal use conditions, its safety is relatively high, but basic chemical handling procedures should still be followed.

This product may cause mild skin and eye irritation, corresponding to GHS categories: skin irritation Category 2 (H315) and eye irritation Category 2A (H319). Therefore, it is recommended to wear chemical safety goggles during handling. For prolonged or repeated direct contact, impermeable protective gloves (e.g., nitrile or neoprene) should be worn. The work area should be well-ventilated, and heating or generation of oil mist in confined spaces should be avoided.

For emergency treatment: In case of skin contact, immediately remove contaminated clothing and wash gently with plenty of running water and soap. For eye contact, hold eyelids open and rinse thoroughly with plenty of running water or saline for at least 15 minutes. If irritation persists, seek medical attention from an eye specialist. In case of spillage, cover and collect using inert absorbent materials such as sand or vermiculite. Waste disposal must comply with local environmental regulations.

Key Safety Operating Points

ItemSpecific Requirements
Personal ProtectionWear chemical safety goggles; wear impermeable gloves (nitrile or neoprene) for prolonged contact
Engineering ControlsEnsure good ventilation in the work area; avoid heating or generating oil mist in confined spaces
Storage TemperatureRecommended 5–40°C, in a cool, dry, well-ventilated place, away from direct sunlight
Incompatible MaterialsKeep away from strong oxidizing agents
Flash Point> 150°C (closed cup), non-flammable liquid
Acute ToxicityOral LD50 > 5000 mg/kg (low toxicity)

Emergency Handling Guidelines

  • Skin Contact: Immediately remove contaminated clothing and wash gently with plenty of running water and soap. Seek medical attention if irritation persists.
  • Eye Contact: Immediately hold eyelids open and rinse thoroughly with plenty of running water or saline for at least 15 minutes. If pain or redness persists, consult an eye specialist.
  • Inhalation: If discomfort occurs due to vapor or oil mist from high temperature, move quickly to fresh air. If symptoms persist, seek medical attention.
  • Ingestion: Rinse mouth immediately with water, do NOT induce vomiting. Bring the safety data sheet to a doctor.
  • Spill Handling: Cover and collect using inert absorbent materials such as sand or vermiculite into a sealed container. Wipe residue with soapy water.

Notes

This product has some biodegradability, but large spills should still be prevented from entering drains, water sources, or soil. After opening and taking material, reseal immediately and keep containers upright to prevent leakage. No eating, drinking, or smoking in the work area. Wash hands thoroughly with soap and water after handling. Although the flash point is relatively high, follow standard fire safety rules and keep away from high temperatures and open flames.