Question

What safety precautions should be taken when using penetrant JFC-2 isooctanol polyoxyethylene ether?

Answer
2026-06-06 官方文档 渗透剂JFC-2异辛醇聚氧乙烯醚

Penetrant JFC-2 is classified as a hazardous chemical under GHS. During operation, it is essential to prevent skin and eye irritation and strictly avoid environmental water pollution.

Detailed Description

Penetrant JFC-2 (isooctanol polyoxyethylene ether) is a nonionic surfactant. According to GHS classification, this product has clear hazards: skin irritation (Category 2, H315), serious eye irritation (Category 2A, H319), and harmful to aquatic life with long-lasting effects (Category 3, H412). Its hazard pictogram is GHS07 (exclamation mark), and the signal word is "Warning". In daily use, operators must establish standardized safety awareness and not underestimate its potential risks due to its appearance as a colorless to slightly yellow transparent liquid.

The core of safe operation lies in "full protection" and "standardized emergency response". Before work, ensure good ventilation, wear chemically resistant protective gloves, protective goggles or face shield, and protective clothing; avoid direct contact of the product with skin, eyes, and clothing during operation; thoroughly wash hands and any exposed skin areas after operation; emergency shower and eyewash equipment should be available near the workplace. When handling, operate slowly to prevent splashing or aerosol generation. Eating, drinking, and smoking are strictly prohibited in the work area.

In the event of contact accidents, timely emergency treatment is critical. For skin contact, immediately remove contaminated clothing and rinse with plenty of running water and soap for at least 15 minutes; for eye contact, hold eyelids open and rinse with water or saline continuously for at least 15 minutes, rolling eyes to ensure thorough rinsing, and seek immediate medical attention; if inhaled, move to fresh air immediately, give oxygen if breathing is difficult; if ingested, rinse mouth with water, do not induce vomiting, seek medical attention immediately and show product label. For spillage, wear protective equipment, collect small spills with inert absorbent material, contain large spills with dikes, and do not flush into sewers or surface waters.

Safety Information Overview

ItemDetails
Signal WordWarning
PictogramGHS07 (Exclamation Mark)
Skin Corrosion/IrritationCategory 2 — H315: Causes skin irritation
Serious Eye Damage/Eye IrritationCategory 2A — H319: Causes serious eye irritation
Hazardous to the Aquatic EnvironmentCategory 3 — H412: Harmful to aquatic life with long lasting effects

Key Safety Operation Points

Personal Protective Requirements:

  • Wear chemically resistant protective gloves (e.g., nitrile gloves)
  • Wear protective goggles or face shield to prevent splashes into eyes
  • Wear protective clothing to avoid direct skin contact
  • Maintain good ventilation in the work area

Storage Conditions:

  • Store in a cool, dry, well-ventilated dedicated warehouse, away from direct sunlight
  • Keep container tightly sealed to prevent moisture absorption and contamination
  • Recommended storage temperature: 5°C to 35°C, avoid extreme temperatures that may cause product stratification or deterioration
  • Keep away from ignition sources, heat, and incompatible substances such as strong oxidizers, strong acids, and strong bases
  • Use spill containment facilities in storage areas, such as dikes or spill pallets

Emergency Response Quick Reference:

  • Skin Contact: Immediately remove contaminated clothing, wash with soap and running water for at least 15 minutes; seek medical attention if irritation persists
  • Eye Contact: Hold eyelids open, rinse with water or saline for at least 15 minutes, rolling eyes; seek immediate medical attention
  • Inhalation: Move to fresh air, keep airway open; give oxygen if breathing is difficult and seek medical attention
  • Ingestion: Rinse mouth with water, do not induce vomiting; if conscious, drink small amounts of water or milk; seek immediate medical attention
  • Spillage: Small spills: collect with inert absorbent material; large spills: contain with dikes; do not allow to enter sewers or waterways

Precautions

  • Empty containers may retain hazardous residues; do not reuse or discard without thorough cleaning
  • Waste product and contaminated containers should be managed as hazardous waste and disposed of by qualified professional agencies
  • Do not discharge untreated waste liquid directly into water bodies; it has long-term hazards to aquatic ecosystems
  • Eating, drinking, or storing food is prohibited in the work area
  • Contaminated clothing should be washed before reuse