Penetrant JFC-2 (Isooctanol Ethoxylate) is a branched alcohol ethoxylate nonionic penetrant with rapid wetting and excellent emulsifying and dispersing properties.
Penetrant JFC-2 (Isooctanol Ethoxylate) is a branched alcohol ethoxylate nonionic penetrant offering rapid penetration with excellent wetting, emulsifying and dispersing functions for textile pretreatment and leather processing.
50kg plastic drum, 200kg plastic drum, IBC tote.
| Property | Value |
|---|---|
| CAS No. | 9002-93-1 |
| Molecular Formula | C14H22O(C2H2O)nH, n≈9-10 |
| Appearance | Colorless to pale yellow viscous liquid |
| Ionic Type | Nonionic |
| Avg. Molecular Weight | Approx. 625 |
| Cloud Point | 65~70 |
| Active Content | ≥99.0 |
| pH Value(1%) | 5.0~7.0 |
| pH Value(5%) | 5.0~7.0 |
| Iodine Value | ≤1 |
| Solubility | Readily soluble in water, alcohols, ketones and other organic solvents |
| Surface Tension | ~30 mN/m (1%aq. soln.) |
| CMC | ~130 mg/L |
| Acid Value | ≤1 |
| Saponification Value | ≤1 |
| Hydroxyl Value | ~90 |
| Moisture | ≤1.0 |
| Density | 1.06-1.07 g/cm³ |
| Kinematic Viscosity | ~240 mm²/s (25°C) |
| Refractive Index | 1.490-1.492 (n20/D) |
| Flash Point | >200°C |
| Hygroscopicity | Not readily hygroscopic |
| Chemical Stability | Stable; compatible with acids and alkalis |
| Amine Value | ≤1 |
| Tertiary Amine Content | ≤0.5% |
| Penetration | ≤5 s (0.1% aq., canvas disc) |
| Foam Property | Medium foam |
| Alkali Resistance | Very good |
| Unsaturation | ≤0.1 mmol/g |
| Viscosity | 30-50 mm²/s |
| Melting Point | <-10°C (liquid) |
| Free Phosphoric Acid | ≤0.1% |
| Monoester Content | ≤0.5% |
| Diester Content | ≤0.5% |
| Low Shear Viscosity | ~240 mPa·s |
| Solid Content | ≥99% |
| Free Alcohol | ≤0.5% |
| Phosphate Monoester | ≤0.5% |
| Phosphate Diester | ≤0.5% |
| Bound Phosphorus | ≤0.01% |
| Heavy Metal | ≤10 mg/kg |
| Arsenic | ≤2 mg/kg |
Signal: Warning
Wear protective gloves and goggles. Ensure adequate ventilation. Avoid eye and skin contact. Wash thoroughly after handling. Do not eat, drink or smoke during operation.
Store in a cool, dry, well-ventilated area. Keep container tightly closed. Keep away from strong oxidizers, strong acids and alkalis.
Skin: Remove contaminated clothing. Wash with soap and water for at least 15 minutes. Seek medical attention if irritation persists.
Eyes: Rinse immediately with plenty of water for at least 15 minutes. Seek medical attention.
Inhalation: Move to fresh air. Seek medical attention if symptoms persist.
Ingestion: Rinse mouth. Do NOT induce vomiting. Drink water. Seek medical attention.
Spills: Absorb with inert material (sand, vermiculite). Collect in sealed containers. Dispose according to local regulations.
Fire: Use water fog, foam, dry powder or CO2. Firefighters wear SCBA.
Products you may be interested in
