The eco-friendly penetrant JFC-M alcohol belongs to nonionic fatty alcohol polyoxyethylene ether surfactants, with an active content ≥99%, easily soluble in water, and can quickly disperse and dissolve at room temperature. Its core advantages lie in extremely low surface tension (0.1% aqueous solution only about 27 mN/m) and excellent penetrating power (1g/L aqueous solution standard canvas settling time ≤5 seconds), making it widely used in multiple industrial fields. When used, it is usually pre-diluted with a small amount of water first, then added to the main working solution and stirred evenly.
This product has excellent chemical compatibility and can remain stable under dilute acid, dilute alkali, and hard water conditions. It can also be compounded with anionic, cationic, and amphoteric auxiliaries, offering extremely wide formulation adaptability. Its HLB value is 11.5~12.5 (from the Guoli Chemical Product Database), and the cloud point is as high as 85~95°C, suitable for most room temperature and medium-high temperature process conditions.
It should be noted that the recommended dosage parameters in the database are not recorded. The reference dosages provided in the table below are empirical ranges based on product performance characteristics and industry common practices. Users should determine the optimal dosage through small-scale experiments based on their specific process conditions, equipment types, and target effects.
| Application Area | Recommended Dosage | Usage Method | Expected Effect |
|---|---|---|---|
| Textile Dyeing and Finishing Pretreatment (Desizing/Scouring/Bleaching) |
1~5 g/L (Working Solution) | First pre-dilute the measured JFC-M alcohol with 5~10 times warm water, then inject into the treatment bath and stir evenly. Can be used alone or in combination with scouring agents, alkali agents, hydrogen peroxide, etc. | Accelerate alkali penetration, quickly swell, emulsify and remove sizing materials and impurities, improving capillary effect and whiteness. |
| Industrial Hard Surface Cleaning (Metal/Plastic Degreasing) |
0.5%~3% (Total Cleaning Solution) | Compound with alkaline or acidic cleaning agents, add to the cleaning tank for circulation or spray use. Low foaming characteristics can reduce rinsing water consumption. | Quickly penetrate the interface between oil stains and substrate, promote emulsification and removal of oil stains, improve degreasing efficiency. |
| Leather Degreasing | 0.5%~2% (Total Degreasing Solution) | Add together with the degreasing agent to the drum or vat, suitable for natural oil removal processes of various raw hides. | Promote deep penetration of degreasing agent into the leather board, improve emulsification removal rate of oil, ensure subsequent dyeing uniformity. |
| Paper Machine Fabric Cleaning and Waste Paper Deinking | 0.1%~0.5% (Total Washing Solution) | For online continuous cleaning, continuously inject into the felt washing system with a metering pump; in deinking process, add during pulping or flotation stage. | Enhance the suspension and separation ability of ink and resin deposits, improve pulp cleanliness. |
| Pesticide Formulation Penetration Enhancement | 0.05%~0.5% (Total Solution) | As a tank-mix adjuvant, mix and use immediately before application, or directly add as a formulation component. | Significantly reduce the surface tension of the solution, enhance spreading, wetting, and penetration on plant leaves and insect surfaces. |
| Parameter | Value | Data Source |
|---|---|---|
| Appearance | Colorless to light yellow transparent liquid | Guoli Chemical Product Database |
| Ionic Type | Nonionic | Guoli Chemical Product Database |
| Active Content | ≥99% | Guoli Chemical Product Database |
| HLB Value | 11.5~12.5 | Guoli Chemical Product Database |
| pH Value (1% Aqueous Solution) | 5.0~7.0 | Guoli Chemical Product Database |
| Penetrating Power (1g/L, 25°C) | ≤5 seconds (Standard Canvas Settlement Method) | Guoli Chemical Product Database |
| Surface Tension (0.1% Aqueous Solution, 25°C) | Approx. 27 mN/m | Guoli Chemical Product Database |
| Cloud Point | 85~95°C | Guoli Chemical Product Database |
| Foam Performance | Low Foaming | Guoli Chemical Product Database |