According to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) assessment, the environmentally friendly penetrant JFC-M alcohol is not classified as a GHS hazardous substance. Under normal use conditions, this product does not pose significant hazards to human health or the environment. Its chemical composition is fatty alcohol polyoxyethylene ether, a non-ionic surfactant that does not contain APEO (alkylphenol polyoxyethylene ether), making it a representative product of the new generation of green and environmentally friendly auxiliaries.
From a toxicological perspective, the product has low acute oral toxicity (rat oral LD50>2000 mg/kg), classifying it as a low-toxicity substance. Tests for skin irritation and eye irritation both show no irritation, and there is no evidence of skin sensitization. In routine industrial operations, as long as basic safety procedures (wearing protective gloves and goggles, maintaining ventilation, etc.) are followed, the risk to human health is extremely low.
From an ecological perspective, the product is readily biodegradable (degradation rate >60% over 28 days under OECD 301B standard), has no significant bioaccumulation potential, and is not classified as hazardous to the aquatic environment. This means that once the product enters the natural environment, it can be rapidly decomposed by microorganisms without long-term accumulation in the ecological chain, complying with global mainstream environmental regulations.
| Assessment Item | Result/Data | Judgment |
|---|---|---|
| GHS Hazard Classification | Not classified as hazardous | Safe |
| Acute Oral Toxicity (Rat LD50) | >2000 mg/kg | Low toxicity |
| Skin Irritation | Test results indicate no irritation | Safe |
| Eye Irritation | Test results indicate no irritation | Safe |
| Skin Sensitization | No evidence of sensitization | Safe |
| Biodegradability (OECD 301B) | Degradation rate >60% in 28 days | Readily biodegradable |
| Aquatic Environmental Hazard | No hazard classification | Environmentally friendly |
| Bioaccumulation | No significant bioaccumulation potential | Low risk |
| APEO Content | Does not contain | Complies with environmental regulations |
This product is widely used in textile printing and dyeing, industrial hard surface cleaning, leather processing, papermaking processes, and pesticide formulations. When used as a penetrant, it is recommended to determine the dosage based on specific process requirements. For textile pre-treatment processes, the recommended dosage is 0.1%-0.5% of the working solution. When used as a penetration enhancer in pesticide formulations, small-scale trials are recommended to determine the optimal addition ratio.
Given its excellent chemical compatibility, it can be used in combination with anionic, cationic, and amphoteric auxiliaries, offering wide formulation adaptability. Its low foaming tendency also helps reduce rinsing water consumption, further minimizing the overall environmental impact.