The storage conditions of the eco-friendly penetrant JFC-M alcohol directly affect the product's performance and service life. This product belongs to nonionic surfactants (fatty alcohol polyoxyethylene ether) and has relatively stable chemical properties. However, under improper storage conditions, deterioration may still occur, such as concentration changes due to water evaporation, decomposition caused by high temperatures, or microbial growth.
To ensure product quality, the container should be sealed immediately after use to prevent water evaporation and the entry of impurities. It is recommended to use the original packaging or containers made of compatible materials, including stainless steel, polyethylene (PE), or polypropylene (PP). The storage area should be kept away from incompatible substances such as strong oxidizers, strong acids, and strong alkalis, while avoiding direct sunlight and heat sources.
Under the recommended storage conditions, the shelf life of unopened products is 24 months from the date of production. After opening, it is recommended to use the product as soon as possible and always ensure the container is well sealed. The storage area should be equipped with bunds or spill containment facilities to prevent accidental leakage and spread.
| Storage Parameter | Requirement |
|---|---|
| Storage Environment | Cool, dry, well-ventilated warehouse or storage area |
| Recommended Temperature | 5°C to 40°C |
| Temperature Restrictions | Avoid freezing and high temperature exposure |
| Light | Avoid direct sunlight |
| Container Material | Stainless steel, polyethylene (PE), polypropylene (PP) |
| Sealing Requirement | Seal immediately after use to prevent water evaporation and impurity entry |
| Substances to Avoid | Strong oxidizers, strong acids, strong alkalis, and other incompatible substances |
| Shelf Life | 24 months from date of production when unopened |
| Leak Protection | Storage area should be equipped with bunds or spill containment facilities |
In application scenarios such as textile dyeing and printing, industrial cleaning, and leather processing, it is recommended to follow the "first in, first out" inventory management principle, prioritizing the use of batches with earlier production dates. After each use, immediately tighten the container lid to minimize the product's exposure to air.
If the product becomes turbid or layers separate under low winter temperatures, this is usually a normal physical change for nonionic surfactants. Simply restore the product to room temperature (above 15°C) and stir appropriately to restore clarity; this does not affect the usage effect.