What are the storage conditions for rapid penetrant T-70E (wetting agent OT)?

Rapid penetrant T-70E (wetting agent OT) should be stored in a cool, dry, well-ventilated dedicated warehouse with an ambient temperature recommended between 5°C and 35°C, away from heat sources, open flames, and strong oxidizers.

Detailed explanation

The storage conditions of rapid penetrant T-70E (sodium diisooctyl sulfosuccinate solution) directly affect the stability and performance of the product. This product is an anionic surfactant. Under improper storage conditions, it may experience issues such as stratification, discoloration, or degradation of active ingredients. Therefore, the following storage specifications must be strictly adhered to.

First, the choice of storage environment is crucial. This product should be placed in a cool, dry, well-ventilated dedicated warehouse, avoiding direct sunlight and staying away from heat sources, sparks, and open flames. The ambient temperature is recommended to be strictly controlled between 5°C and 35°C. Temperatures that are too low may cause the product to freeze or precipitate, while excessively high temperatures may accelerate product deterioration, affecting penetration and wetting performance.

Secondly, container management and isolated storage are equally important. The packaging container must be kept sealed. After opening, it should be carefully resealed and stored upright to prevent leakage and external contamination. Storage should be away from incompatible substances such as strong oxidizers, strong acids, and strong alkalis. It is strictly prohibited to store or transport together with food, beverages, or animal feed. The storage area floor should be paved with impermeable and corrosion-resistant materials, and secondary leak prevention facilities such as dikes or collection trenches should be installed. Emergency washing equipment and appropriate fire extinguishing equipment should also be available nearby.

Storage condition parameters

Application suggestions

To maximize product performance and usage safety, it is recommended that users establish a comprehensive inventory management system:

• First-in, first-out principle: Strictly follow the production date or batch order for usage to avoid prolonged storage leading to product expiration or deterioration.
• Regular inspections: Regularly check container sealing and observe if the product appearance shows any abnormalities (such as stratification, increased turbidity, deepening color, etc.). Once anomalies are found, quality testing should be conducted before deciding whether to continue using.
• Temperature and humidity monitoring: Install thermometers and hygrometers in the warehouse. Especially during high summer temperatures and low winter temperatures, monitoring should be strengthened and necessary temperature control measures should be taken.

Precautions

• The product may freeze or become turbid at low temperatures near 0°C. Before use, slowly restore to room temperature and stir evenly. Performance is usually unaffected, but repeated freeze-thaw cycles should be avoided.
• All spills and contaminated absorbent materials should be disposed of as hazardous waste. Do not discharge into sewers, surface water, or soil. Entrust qualified professional institutions for disposal.
• For detailed safety and handling information, please refer to the product SDS document. Read and understand the relevant safety instructions before use.