Question 1

Is the rapid penetrant T-70E (wetting agent OT) harmful to the human body? Does it have an impact on the environment?

Accepted Answer

The rapid penetrant T-70E (wetting agent OT) has certain irritant hazards to the human body and has long-term adverse effects on the aquatic environment. It must be used under standardized operating procedures and strictly prevented from entering water bodies. Detailed Description The chemical name of the rapid penetrant T-70E (wetting agent OT) is sodium bis(2-ethylhexyl) sulfosuccinate, which belongs to anionic surctants. According to the GHS classification of chemicals, this product is classified as Skin corrosion/irritation (Category 2) and Serious eye damage/eye irritation (Category 2), and is also categorized as Hazardous to the aquatic environment - long-term hazard (Category 3). This means that under normal industrial use, if appropriate protective measures are not taken, this product may cause adverse effects on human health and the aquatic ecological environment. From the perspective of human health, the main routes of hazard for this product are skin contact and eye contact. Skin contact can cause irritation reactions, manifested as redness, itching, or a burning sensation; eye contact can cause severe eye irritation, leading to pain, tearing, conjunctival congestion, and other symptoms. Under normal use conditions, inhalation risk is relatively low, but if the workplace is poorly ventilated or if atomization occurs, inhaling vapors or mists may still cause respiratory discomfort. It is particularly important to emphasize that this product is not a highly toxic or carcinogenic substance, and its hazards are mainly local irritant effects. As long as safety operating procedures are strictly followed and personal protective equipment is properly worn, the risk is completely controllable. From the perspective of environmental impact, this product is classified as Harmful to aquatic life with long lasting effects (H412). This means that if this chemical is directly discharged into rivers, lakes, or oceans, it may cause toxicity to aquatic organisms such as fish and plankton, and its impact has a certain persistence. Therefore, it is strictly prohibited to directly discharge the product or waste liquids containing this product into sewers, surce water, or groundwater systems. All wastes must be disposed of in accordance with relevant regulations by qualified professional institutions. Safety Protection Points Hazard TypeHazard StatementGHS Category Skin irritationH315 Causes skin irritationSkin corrosion/irritation Category 2 Eye irritationH319 Causes serious eye irritationSerious eye damage/eye irritation Category 2 Aquatic environment hazardH412 Harmful to aquatic life with long lasting effectsHazardous to the aquatic environment - long-term hazard Category 3 Usage and Operation Recommendations Personal protective measures: During operation, wear chemically resistant protective gloves (such as nitrile rubber or neoprene gloves), chemical safety goggles or ce shields, and chemical protective work clothes. In poorly ventilated areas or processes that may generate mists, it is recommended to wear a filtering respirator. Thoroughly wash exposed skin areas before and after work, and do not eat, drink, or smoke in the workplace. Environmental management measures: The workplace floor should be covered with impermeable, corrosion-resistant materials and equipped with secondary containment cilities such as dikes or collection trenches. Any leaks should be immediately covered with inert absorbent materials (such as dry sand, vermiculite, etc.) and collected into dedicated sealed containers. Wastewater from cleaning the spill area must be collected and treated, and must not be discharged into the environment. All wastes should be sent to qualified professional institutions for incineration or physical/chemical treatment in accordance with hazardous waste regulations. Notes This product is not classified as dangerous goods, but during transportation, ensure that the packaging is sealed and intact to prevent leakage. Storage temperature is recommended to be maintained between 5°C and 35°C to prevent freezing or deterioration due to high temperature, and keep away from strong oxidizers, strong acids, and strong bases. If accidentally enters eyes, immediately flush with plenty of running water for at least 15 minutes and seek medical attention as soon as possible; do not delay. If skin contact occurs, immediately remove contaminated clothing and thoroughly wash with plenty of running water and soap for at least 15 minutes. The above information is based on the product SDS. Users are responsible for independently assessing safety applicability under specific operating conditions.

Question 2

What should be done if problems occur during the use of Rapid Penetrant T-70E and Wetting Agent OT? How to obtain technical support?

Accepted Answer

When encountering problems during use, it is recommended to first handle the on-site situation according to safety emergency procedures, and then obtain professional support by reviewing product information and contacting the technical team of Guoli Chemical. Detailed Explanation When problems occur during the use of Rapid Penetrant T-70E (Wetting Agent OT), it is first necessary to determine the nature of the problem. If it is a safety emergency (such as skin contact, eye contact, spillage, etc.), immediate action must be taken according to the emergency measures in the product SDS document: For skin contact, rinse with plenty of running water and soap for at least 15 minutes; for eye contact, hold the eyelids open and rinse continuously with running water for at least 15 minutes and seek medical attention as soon as possible; for spills, cover with inert absorbent material and collect, preventing entry into drains and surce water bodies. After the on-site situation is under control, then troubleshoot technical issues. If it is a process or technical issue, such as insufficient penetration, unsatisctory wetting effect, poor compatibility, precipitation or stratification, it is recommended to conduct self-inspection from the following aspects: ① Confirm whether the product is stored correctly at 5°C to 35°C, without freezing or high-temperature deterioration; ② Check if the water hardness in the preparation of the working solution is high; although this product has good hard water resistance, extreme water quality may still affect performance; ③ Verify if incompatible substances such as strong acids, strong bases, or strong oxidizers are mixed into the formulation; ④ Confirm whether the dosage is within the recommended range, as over- or under-dosing may cause abnormal effects. If the problem persists after self-inspection, it is recommended to contact the technical team of Hai'an County Guoli Chemical Co., Ltd. for professional support. Before contacting, please prepare the following information to quickly identify the problem: batch number, purchase date, storage conditions, detailed description of the problem phenomenon (preferably with photos or videos), usage formula and process parameters (such as concentration, temperature, pH value, auxiliary additives, etc.). Channels for Obtaining Technical Support Technical Data Sheet (TDS): Each batch of product is accompanied by a technical data sheet containing detailed technical parameters such as active content, pH range, and penetration power, serving as the primary reference. Safety Data Sheet (SDS): Contains complete safety operation, storage conditions, first aid measures, and waste disposal guidance; for safety-related issues, this should be consulted first. Batch Inspection Report: Each batch of product undergoes strict quality inspection; the inspection report helps determine whether the problem is related to product quality. Direct Contact with Technical Team: Contact the sales or technical department of Guoli Chemical, and professional engineers will provide one-on-one problem diagnosis and solutions. Precautions Do not blindly adjust the dosage or arbitrarily mix with other auxiliaries without identifying the cause, as this may worsen the problem. All product-related waste (including contaminated packaging) must be disposed of by qualified agencies in accordance with hazardous waste regulations, and must not be discarded arbitrarily. This product is harmful to aquatic life with long-lasting effects (H412); spills or waste disposal must strictly comply with environmental regulations.

Question 3

How to purchase Quick Penetrant T-70E, Wetting Agent OT? What is the minimum order quantity?

Accepted Answer

The specific price and minimum order quantity for Quick Penetrant T-70E/Wetting Agent OT need to be obtained directly from the Guoli Chemical sales team, as there is no publicly available online data. Detailed Explanation Currently, the Guoli Chemical product database does not provide the real-time price and minimum order quantity (MOQ) for this product. The price note clearly states: "The above prices are for reference only, please contact the sales team for the latest quotation." The price of chemical raw materials is usually adjusted in real-time based on ctors such as order quantity, payment method, delivery time, and market raw material fluctuations, so direct communication is the most accurate approach. Although the minimum order quantity is not explicitly listed, the product database provides clear standard packaging specifications, which are typically the basis for business negotiations and setting the minimum order quantity. Based on your usage needs (e.g., trials, pilot tests, or mass production), you can use the following packaging information to inquire with the sales personnel: Standard Packaging Specifications and Contact Information The following packaging options are available for this product for your reference during inquiries: 50 kg plastic drum (suitable for laboratory or small batch trials) 200 kg plastic drum (standard industrial packaging) IBC tote tank (suitable for large-scale continuous production, reducing packaging material and logistics costs) To obtain the latest quotation, request samples, or confirm the minimum order quantity, we recommend contacting the Guoli Chemical sales department via the following methods: Call the company's official sales hotline or visit the official website of Haian Guoli Chemical Co., Ltd. (usually the direct phone number and email of the regional sales manager can be found on the "Contact Us" page). When communicating, please clearly state your target application field (e.g., textile printing and dyeing, pesticide formulations, coatings, etc.) so that technical staff can provide accurate product grade recommendations and usage suggestions. Application Suggestions Technical Confirmation Before Purchase Before placing an order, it is recommended to verify the performance with a small sample. The core indicators of this product include: Active matter content: ≥70% Penetrating power: Canvas sinking method test ≤5 seconds (1% aqueous solution) pH value: 5.0~7.0 (1% solution) If you are applying it in the fields of pesticide formulations or cleaning agents, special attention should be paid to its stability in hard water and low foam characteristics. Guoli Chemical usually provides samples and TDS (Technical Data Sheet) for customers to test, ensuring consistency between batches. Precautions Storage requirements: After receipt, please confirm the packaging is intact and store in a cool, dry place at 5°C~35°C, avoiding freezing or high temperature deterioration. Safety precautions: This product is an anionic surctant, which may cause skin and eye irritation. Please be sure to wear protective gloves and goggles during handling. Transportation tips: This product is not classified as dangerous goods under relevant regulations, but the packaging must be sealed during transportation to prevent leakage.

Question 4

Fast Penetrating Agent T-70E, Wetting Agent OT - Do they meet environmental requirements? Can test reports be provided?

Accepted Answer

st Penetrating Agent T-70E (Wetting Agent OT) can meet current environmental regulatory requirements when used in compliance, but it itself poses potential hazards to the aquatic environment and requires strict emission control; test reports can be obtained by contacting the Guoli Chemical technical team. Detailed Description The chemical name of st Penetrating Agent T-70E (Wetting Agent OT) is sodium di(2-ethylhexyl) sulfosuccinate, which belongs to anionic surctants. According to the GHS classification in the product SDS, this product is classified as "Hazardous to the aquatic environment - long-term hazard (Category 3)", with the hazard statement H412 (Harmful to aquatic life with long-lasting effects). This means that the product is not a non-toxic and harmless green chemical, and if its waste liquid is directly discharged into natural water bodies, it will cause adverse effects on aquatic ecosystems. However, "whether it meets environmental requirements" is not a simple "yes or no" question, but depends on the application scenario and control methods. In industrial application scenarios such as textile printing and dyeing, leather processing, and pesticide formulation, as long as the enterprise ensures: ① the working fluid is fully consumed in the process; ② wastewater is discharged after treatment to meet standards by the ctory's wastewater treatment station or centralized treatment in the industrial park; ③ waste packaging and residues are entrusted to qualified hazardous waste disposal agencies, the use of this product fully complies with current environmental regulations. In addition, the product has good biodegradation potential (sulfosuccinate surctants generally have certain biodegradability) and can be effectively degraded in standard wastewater treatment systems. Regarding specific environmental certifications (such as OEKO-TEX®, ZDHC, Bluesign® and other third-party certifications), there is currently no clear record in the product database that this product has obtained the above certifications. If end customers have specific requirements for environmental certifications of brics or products, it is recommended to communicate with the Guoli Chemical technical team to confirm compliance with specific certification standards. Environmental Compliance Key Points Environmental DimensionCompliance StatusDescription GHS Hazard ClassificationHazardous to aquatic environment - long-term (Category 3)H412: Harmful to aquatic life with long-lasting effects Wastewater Discharge ControlMust be treated to meet standards before dischargeDirect discharge of waste liquid containing the product into sewers or natural water bodies is prohibited Waste Disposal RequirementsManaged as hazardous wasteProduct residues and contaminated packaging must be disposed of by qualified agencies Third-party Environmental CertificationNo records currentlyCertification status such as OEKO-TEX®, Bluesign®, ZDHC needs to be confirmed with the technical team BiodegradabilityHas certain degradation potentialThe sulfosuccinate structure can be degraded by microorganisms in wastewater treatment systems About Test Reports According to the product technical description, each batch of st Penetrating Agent T-70E undergoes strict quality inspection. The product data sheet states: "For detailed technical parameters such as active content, pH range, and penetrating power, please refer to the product technical data sheet or contact the technical team to obtain the test report." This indicates that Guoli Chemical has a complete batch inspection system and can provide relevant quality inspection reports. If the test reports you need include: Routine technical index test report (active content, pH range, penetrating power, etc.) — can be obtained directly by contacting the Guoli Chemical sales or technical team. SDS Safety Data Sheet — Complete SDS information is already available in the product database; contact the company to obtain the official version. Third-party environmental/safety test reports (such as RoHS, REACH, heavy metal residues, specific hazardous substance limits, etc.) — specific testing item requirements need to be submitted to the technical team to confirm whether existing reports are available or if samples can be arranged for testing. End brand environmental certification compliance statement (such as OEKO-TEX®, ZDHC MRSL conformity, etc.) — needs one-on-one communication to confirm. Precautions Protective gloves and chemical safety goggles must be worn during operation to avoid direct contact with skin and eyes. Production wastewater must be treated by the wastewater treatment system to meet standards before discharge; direct discharge is strictly prohibited. Waste containers and residual materials shall be managed as hazardous waste and disposed of by qualified units. If used for export textiles or brand OEM products, please confirm in advance the end customer's specific requirements for environmental certification of textile chemicals. To obtain test reports, please contact the Guoli Chemical technical/sales team; this system does not currently support direct download of report files.

Question 5

What are the advantages of Quick Penetrant T-70E and Wetting Agent OT compared to other similar products?

Accepted Answer

Compared to other similar products, the core advantages of Quick Penetrant T-70E lie in its excellent ultra-st penetration speed (canvas sinking method ≤ 5 seconds) achieved with a high effective content of 70%, outstanding resistance to hard water and alkali, low foam, and extremely wide application fields. Detailed Description Quick Penetrant T-70E (Wetting Agent OT) is a classic and efficient anionic surctant with the chemical name sodium di(2-ethylhexyl) sulfosuccinate. Compared to other types of penetrants (such as tty alcohol polyoxyethylene ether phosphate, isooctyl alcohol polyoxyethylene ether, etc.), its greatest advantage lies in its molecular structure, which endows it with extremely rapid wetting and penetrating ability. It can reduce the surce tension of liquids to a very low level (≤ 30 mN/m) at very low concentrations (usually 0.1%-1% working solution), thereby quickly entering and spreading into the micro-pores of substrates such as fibers, leather, and metals. This is particularly critical in processes with high speed requirements, such as textile dyeing and metal cleaning. Compared to other similar series of quick penetrant T products on the market (such as 40%, 50%, and 75% content), Guoli Chemical's T-70E represents the best balance of performance, economy, and ease of use. High-concentration products (75%) have higher active matter content but are also more viscous, posing challenges for operation and pumping at low temperatures; low-concentration products (40%, 50%) are relatively less economical. T-70E with 70% content ensures high cost-effectiveness while still possessing excellent low viscosity and fluidity, cilitating precise metering and dilution, making it an ideal choice for large-scale industrial production. Furthermore, the versatility of this product is also a significant advantage. It is not only a top-tier penetrant but also possesses excellent emulsifying, dispersing, and wetting functions. In practical applications, it exhibits strong resistance to hard water and alkali (can withstand 80~100g/L NaOH solution), and has good chemical stability, resisting both acids and alkalis. These characteristics enable it to adapt to various complex working fluid environments ranging from strong acids to strong alkalis, which is precisely a capability that many non-ionic penetrants lack. Additionally, its low-foam property makes it more suitable for dynamic processes such as spray cleaning, avoiding foam issues without the need for additional defoamers. Technical Parameters The following technical parameters intuitively reflect the excellent performance of Quick Penetrant T-70E: Core Performance Indicator Typical Value of Quick Penetrant T-70E Comparison with General Industry Requirements/Ordinary Products Penetration Power (1% aqueous solution, canvas sinking method) ≤ 5 seconds Standard for high-quality penetrant is ≤ 120 seconds, ordinary products > 60 seconds Surce Tension (25°C) ≤ 30 mN/m Surce tension of water is 72 mN/m, ordinary surctants are 30-45 mN/m Active Matter Content ≥ 70% Common market contents range from 40% to 75% Alkali Stability Good, can withstand 80~100g/L NaOH Some ordinary penetrants may precipitate or il in high-concentration alkali Foam Characteristics Low Foam Many penetrants have high foaming, requiring additional defoamers Hard Water Resistance Excellent, not prone to precipitation or deactivation Anionic surctants are generally sensitive to hard water HLB Value Approximately 13 Indicates both hydrophilic and lipophilic properties, wide applicability *The above data are all sourced from the Guoli Chemical product technical database, and each batch of products undergoes strict quality inspection. Application Recommendations Given its excellent penetration, wetting, emulsifying, and low-foam properties, Quick Penetrant T-70E performs exceptionally well in the following application scenarios with stringent penetration requirements: Textile Dyeing and Finishing: Recommended for desizing, scouring, and bleaching pretreatment processes of cotton and blended brics, with a recommended dosage of 0.5-2.0 g/L. It ensures rapid penetration of alkali and bleach into fibers, uniform treatment, and high capillary effect. Also suitable for dyeing and finishing to improve dye uptake and adsorption of finishing agents. Pesticide Formulations: As a tank-mix adjuvant or formulation component, recommended dosage is 1%-5% of the total formulation weight. It significantly enhances the wetting and spreading ability of the pesticide solution on hydrophobic plant leaf surces, improving efficacy and resistance to rain wash-off. Industrial and Household Cleaning: As a core synergistic component of hard surce cleaners and laundry detergents, recommended addition amount is 1%-8% of the total formulation. Its rapid penetration ability can remove stubborn oil stains, improve degreasing efficiency, and its low-foam property is particularly suitable for automatic dishwashers and spray cleaning. Metal Processing and Cleaning: In pickling or alkaline degreasing processes, adding 0.2-1.0 g/L can quickly remove oil and wax from metal surces through the synergistic effect of rapid penetration and emulsification. Precautions Operational Protection: This product is a chemical that can cause skin and eye irritation (H315, H319). Always wear chemical safety goggles and chemical-resistant protective gloves (e.g., nitrile rubber gloves) during operation. Environmental Safety: Harmful to aquatic life with long-lasting effects (H412). Do not discharge untreated product or waste liquid directly into sewers, surce water, or any water bodies. Storage Conditions: Store in a cool, dry, and well-ventilated place at 5°C to 35°C, away from heat sources and strong oxidizers. Keep container tightly sealed to prevent moisture absorption. Usage Recommendations: Perform compatibility testing before use to determine the optimal dosage in specific formulations. The product has slight hygroscopicity; reseal promptly after opening.

Question 6

How should Rapid Penetrant T-70E, Wetting Agent OT be stored? What is the shelf life?

Accepted Answer

Rapid Penetrant T-70E (Wetting Agent OT) should be stored in a cool, dry, and well-ventilated warehouse with a recommended temperature of 5°C–35°C, protected from direct sunlight and freezing. The shelf life is not explicitly marked in the product database; the industry common reference is generally 12 months (from the date of production, under original sealed conditions). Detailed Description The main component of Rapid Penetrant T-70E (Wetting Agent OT) is dioctyl sulfosuccinate sodium salt (70% solution), which belongs to the anionic surctant category. Under appropriate storage conditions, this product has good chemical stability, but improper storage environment may cause product stratification, deterioration, or performance degradation. To maintain the product's penetrating and wetting performance to the greatest extent, the following storage specifications must be strictly followed. Regarding the shelf life: According to the product database of Guoli Chemical, this product currently has no official shelf life data. Based on industry practices, sulfosuccinate surctants (70% solution) under original sealed and recommended storage conditions typically have a shelf life of 12 months from the production date. After the shelf life expires, it is recommended to contact the technical team for performance retesting; confirmation of key indicators such as penetrating power, pH value, and active matter content is required before continued use. For specific batch validity, please refer to the product packaging label or the Certificate of Analysis (COA). During storage, if obvious stratification, increased turbidity, unusual odor, or color darkening are observed, the product should be stopped even if the shelf life has not expired, and the Guoli Chemical technical team should be contacted for quality assessment. Storage Condition Requirements Storage ElementSpecific Requirement Ambient TemperatureRecommended to be kept between 5°C and 35°C; Freezing is strictly prohibited; Avoid long-term storage in high temperatures (>40°C) Storage EnvironmentCool, dry, well-ventilated dedicated warehouse, away from heat sources, sparks, and open flames; Protect from direct sunlight Container SealingKeep sealed when not in use; After opening, re-seal carefully and keep upright to prevent water evaporation and external contamination Container MaterialPackaging containers must be sturdy and intact, and the material must be compatible with the product (stainless steel, polyethylene, or plastic-lined containers are recommended) Prohibited IsolationKeep away from strong oxidizers, strong acids, strong bases, and other incompatible materials; Do not mix or transport with food, beverages, or animal feed Floor ProtectionStorage area floor should be laid with anti-seepage, corrosion-resistant materials, and equipped with secondary containment such as dikes or collection trenches. Application Recommendations To ensure stable product performance, it is recommended to follow the First-In-First-Out (FIFO) principle, prioritizing the use of earlier batches. After each use, immediately seal the container to minimize prolonged exposure of the product to air, thereby delaying potential oxidation or moisture absorption. In low-temperature winter environments, the product viscosity may increase; before use, the container can be placed in a room temperature environment to naturally warm up (do not heat directly). After the fluidity is restored, stir evenly before normal use. Precautions This product is sensitive to environmental temperature; freezing is strictly prohibited — freezing may cause irreversible destruction of the emulsion structure and stratification, severely affecting the use effect. Opened packaging should be used up quickly. If long-term storage of opened product is required, it is recommended to fill the container with nitrogen for inert gas protection. Waste product and contaminated packaging must be disposed of by qualified professional agencies in accordance with hazardous waste laws and regulations; Do not discharge into water bodies or soil freely. For complete safety operation, first aid measures, and leakage treatment methods for this product, please refer to the product SDS document.

Question 7

What safety precautions should be taken when using rapid penetrant T-70E and wetting agent OT?

Accepted Answer

When using rapid penetrant T-70E (wetting agent OT), it is essential to focus on protecting against skin and eye irritation, avoiding environmental pollution, and strictly following storage and emergency handling procedures. Detailed Explanation Rapid penetrant T-70E (wetting agent OT), with the chemical name sodium di(2-ethylhexyl) sulfosuccinate, is an anionic surctant. According to GHS chemical classification standards, this product lls under skin corrosion/irritation (Category 2) and serious eye damage/eye irritation (Category 2), and also poses long-term hazards to the aquatic environment (Category 3). Operators must fully understand its hazardous characteristics and receive appropriate safety operation training before use. During routine operations, the work area should be well-ventilated, and local exhaust ventilation should be installed if necessary. For personal protection, chemical safety goggles or ce shields, chemical-resistant gloves (e.g., nitrile rubber or neoprene gloves), and chemical protective clothing and safety shoes must be worn. Eating, drinking, or smoking is strictly prohibited during operations; exposed skin areas should be thoroughly washed before and after handling. Containers must always be kept closed when not in use to prevent leaks and external contamination. The product should be stored in a cool, dry, well-ventilated dedicated warehouse, with the ambient temperature recommended to be between 5°C and 35°C, away from heat sources, sparks, and open flames, and protected from direct sunlight. It should be kept away from incompatible materials such as strong oxidizers, strong acids, and strong bases, and must not be stored or transported together with food, beverages, or animal feed. In the event of a spill, the spill area should be immediately isolated, and inert absorbent materials (e.g., dry sand, vermiculite) should be used for collection, preventing the spill from entering sewers or surce waters. Hazard Overview Hazard ClassHazard CodeHazard Statement Skin corrosion/irritation (Category 2)H315Causes skin irritation Serious eye damage/eye irritation (Category 2)H319Causes serious eye irritation Hazardous to the aquatic environment - long-term hazard (Category 3)H412Harmful to aquatic life with long lasting effects Personal Protective Equipment Requirements Body PartProtective MeasureExplanation Eyes/ceChemical safety goggles or ce shieldMust be worn to prevent splashes into eyes HandsNitrile rubber or neoprene glovesMust be worn during operation; check integrity and permeation resistance before use Skin and bodyChemical protective clothing and safety shoesAvoid direct skin contact Respiratory systemGenerally not requiredIn case of poor ventilation or potential aerosolization, it is recommended to wear a filter-type respirator Emergency First Aid Measures Skin contact: Immediately remove contaminated clothing, rinse thoroughly with plenty of running water and soap for at least 15 minutes; seek medical attention if irritation persists. Eye contact: Immediately open eyelids, flush with plenty of running water or saline solution for at least 15 minutes, seek medical attention promptly without delay. Inhalation: Move to fresh air quickly; keep airway clear; seek medical attention if feeling unwell. Ingestion: Rinse mouth with water, do NOT induce vomiting, drink a small amount of milk or water to dilute, seek medical attention immediately and show product container or safety data sheet. Firefighting: Suitable extinguishing media: dry powder, carbon dioxide, foam, water mist; avoid using direct strong water streams on spilled material. Precautions All collected spill waste and contaminated packaging must be disposed of by qualified professional agencies in accordance with hazardous waste regulations; do not discard or discharge into the environment. For detailed safety technical instructions, please refer to the complete SDS of the product, and read and understand all safety guidelines thoroughly before use. Users are responsible for independently assessing the safety suitability under specific working conditions.

Question 8

How to use Rapid Penetrant T-70E and Wetting Agent OT? What is the recommended dosage?

Accepted Answer

Rapid Penetrant T-70E should be added at appropriate ratios depending on different industries and application scenarios. The typical recommended dosage range is 0.1% to 2.0% of the total working solution. It is recommended to determine the optimal dosage through small-scale tests. Detailed Explanation Rapid Penetrant T-70E (Wetting Agent OT) is a general-purpose anionic surctant, chemically named sodium di(2-ethylhexyl) sulfosuccinate. The product is a colorless to light yellow transparent viscous liquid with an active matter content ≥70%. Its core function is to rapidly reduce the surce tension of liquids (1% aqueous solution surce tension ≤30 mN/m), achieving efficient penetration and wetting, playing a key role in industries such as textiles, pesticides, coatings, and cleaning. When using, directly add this product to water or an aqueous working solution system and stir evenly. Due to its moderate viscosity (≤200 mPa·s at 25°C), it is easy to operate and can be added directly by pouring or pumping. It is recommended to add slowly under stirring to ensure full dispersion and dissolution. This product is easily soluble in water and has good compatibility in hard water, acid, and alkali systems — excellent alkali resistance, capable of withstanding 80~100g/L NaOH concentration, suitable for strong alkaline process environments such as textile pretreatment. Regarding the specific recommended dosage, the Guoli Chemical product database does not have a uniform fixed value because the optimal dosage depends on the substrate type, treatment method, process temperature, contact time, and the synergistic effect of other components in the formulation. Below are typical reference dosage ranges for various industries. It is strongly recommended to conduct small-scale tests before large-scale use to determine the best addition ratio that suits your process system and economy. Technical Parameters Parameter NameValue AppearanceColorless to light yellow transparent liquid Ionic TypeAnionic Active Matter Content≥70% HLB ValueApproximately 13 pH Value (1% Aqueous Solution)5.0~7.0 Penetration Power (1% Aqueous Solution, Canvas Sedimentation Method)≤5 seconds Surce Tension (1% Aqueous Solution)≤30 mN/m Critical Micelle Concentration (CMC, 25°C)Approximately 0.1% Density (25°C)1.05~1.10 g/cm³ Kinematic Viscosity (25°C)≤200 mm²/s Alkali ResistanceGood, withstands 80~100g/L NaOH Foam CharacteristicsLow foam Application Recommendations The following are general reference dosages for various industries (based on the total weight of the working solution or formulation): Textile Printing and Dyeing Pretreatment (Desizing/Scouring/Bleaching): 0.5~2.0 g/L, which accelerates the penetration of alkali and bleaching liquor into the fiber interior, improving treatment uniformity and efficiency. Textile Printing and Dyeing Finishing: 0.1~0.5% (by weight of finishing liquid), promoting deep adsorption and spreading of finishing agents on the bric. Leather Processing (Soaking/Degreasing/Tanning): 0.3~1.0% of the pelt weight, shortening soaking and rehydration time, eliminating hard spots and color streaks. Paper Industry (Coating/Sizing/Deinking): 0.05~0.3% (based on bone-dry pulp or coating weight), improving coating uniformity and enhancing ink detachment efficiency. Pesticide Formulations (Wettable Powder/Suspension Concentrate/Soluble Concentrate): 1.0~5.0% of the total formulation, enhancing the spreading and penetration of the spray liquid on the target surce, improving efficacy. Coatings and Inks: 0.1~0.5% of the total formulation, used for pigment wetting and dispersion and substrate spreading, reducing shrinkage and floating color. Metal Cleaning and Industrial Cleaners: Add 2.0~8.0% by weight in the concentrate, working solution concentration 0.1~0.5%, improving degreasing and detergency efficiency. Household Cleaners (Laundry Liquid/Hard Surce Cleaner): 0.5~2.0% of the total formulation. Emulsion Polymerization: 0.5~2.0% of the monomer total, as an auxiliary emulsification stabilizer, adjusting latex particle size distribution. Petroleum Extraction (Drilling Fluid/Oil Displacement Agent): 0.1~0.5%, reducing intercial tension, improving wetting reversal and displacement efficiency. Data Source Note: The above dosages are general reference values based on product characteristics and industry experience. The Guoli Chemical product database does not contain standard dosage data for each industry. The final dosage must be determined by the user through small-scale experiments. Precautions Small-scale test priority: When first applied to a new system, it is necessary to determine the optimal economical dosage through laboratory small-scale tests to avoid excessive use leading to foam issues or increased costs. Addition sequence: It is recommended to stir water or aqueous solvent evenly before slowly adding this product. If the formulation contains nonionic surctants, note that there may be synergistic or antagonistic effects between them, and compatibility should be verified through experiments. Personal protection: This product can cause skin irritation (H315) and serious eye irritation (H319). When handling, wear nitrile or neoprene protective gloves, chemical safety goggles, and protective work clothing. Storage requirements: Store sealed in a cool, dry, and well-ventilated place, with an ambient temperature recommended between 5°C and 35°C, to prevent freezing or high-temperature deterioration. Keep away from strong oxidizers, strong acids, and strong bases. Environmental requirements: This product is harmful to aquatic life with long-lasting effects (H412). Do not discharge waste liquid containing this product directly into water bodies or sewers. Disposal must comply with local environmental regulations.

Question 9

In which industries and processes are Rapid Penetrant T-70E and Wetting Agent OT mainly used?

Accepted Answer

Rapid Penetrant T-70E (Wetting Agent OT) is widely used in industries such as textile printing and dyeing, leather processing, papermaking, pesticide formulations, coatings and inks, metal cleaning, household and industrial cleaning agents, petroleum extraction, and emulsion polymerization, serving as an efficient wetting and penetrating agent throughout multiple key process stages. Detailed Description Rapid Penetrant T-70E, with the chemical name sodium di(2-ethylhexyl) sulfosuccinate, is an anionic surctant. It appears as a colorless to light yellow transparent viscous liquid. Its core advantages lie in its excellent rapid penetration ability and superior wetting and spreading performance, which quickly reduce liquid surce tension, allowing the working fluid to rapidly wet and penetrate into the substrate interior. It also possesses good emulsifying and dispersing functions and hard water resistance, maintaining stable effects under various water quality conditions. In textile printing and dyeing, this product is used throughout core processes such as pre-treatment desizing, scouring, bleaching, and finishing, accelerating the penetration of alkali, bleaching, or dyeing liquids into fiber interiors, significantly improving dye uptake and color stness. In leather processing, it is applied in wet processing stages like soaking, degreasing, and tanning, shortening soaking and re-wetting time, eliminating leather hard spots and color unevenness, and improving leather yield and hand feel. In industries such as pesticide formulations, coatings, and inks, this product serves as a wetting and penetrating synergist, significantly reducing the contact angle of the liquid on target surces, enhancing spreading and absorption. In fields like petroleum extraction, metal cleaning, and household cleaning agents, its synergistic effect of rapid penetration and emulsification effectively improves degreasing efficiency, stain removal speed, and displacement efficiency, making it highly versatile. Application Areas and Processes Overview Application Industry Specific Process/Stage Function/Role Textile Printing and Dyeing Desizing, Scouring, Bleaching, Dyeing, Finishing Reduces surce tension of working liquid, promotes uniform penetration of dyes and chemicals, improves dye uptake and color stness Leather Processing Soaking, Liming, Degreasing, Tanning Quickly wets leather fibers, shortens re-wetting time, promotes chemical penetration, improves softness and fullness Papermaking Industry Deinking, Sizing, Coating Helps ink detach from fibers, improves wetting and spreading of sizing and coating liquids on paper web, enhances sizing uniformity Pesticide Formulations Wettable Powders, Suspension Concentrates, Aqueous Solutions, Emulsifiable Concentrates Reduces contact angle of spray liquid, enhances droplet spreading and penetration, improves efficacy and rain-stness Coatings and Inks Pigment Dispersion, Grinding, Application Accelerates pigment wetting and dispersion, prevents floating and flooding, eliminates craters and orange peel, improves coating adhesion Emulsion Polymerization Polymerization Process Acts as co-emulsifier to stabilize latex particles, adjust particle size distribution, improve emulsion storage stability Metal Cleaning Spray Cleaning, Immersion Cleaning, Degreasing Penetrates and strips oil from metal surces, lifts and disperses grease, improves degreasing and cleaning efficiency Household and Industrial Cleaning Agents Laundry Liquid, Hard Surce Cleaners, Glass Cleaners Powerfully wets stains and surces, promotes penetration and removal of cleaning components, accelerates stain removal Petroleum Extraction Drilling Fluids, Completion Fluids, Oil Displacement Systems Reduces oil-water intercial tension, minimizes water blockage damage, improves wettability and displacement efficiency Application Recommendations Rapid Penetrant T-70E has good water solubility and compatibility, and can be compounded with nonionic and anionic surctants and various auxiliaries. In textile and leather processing, it is recommended to adjust the dosage according to the process liquor ratio and fiber type. In pesticide and coating formulations, it can be added as needed as a wetting and penetrating synergist. Its good hard water resistance makes it especially suitable for industrial environments with complex water quality conditions. For specific dosages, refer to the product technical data sheet or contact the Guoli Chemical technical team for targeted formulation guidance. Precautions This product may cause skin irritation and serious eye irritation. Wear chemical-resistant protective gloves and chemical safety goggles during operation. It is harmful to aquatic life with long-lasting effects. Do not discharge directly into water bodies. Waste disposal must comply with local environmental regulations. Store in a cool, dry, well-ventilated warehouse. The ambient temperature should be maintained between 5°C and 35°C, away from strong oxidizers, strong acids, and strong bases.

Question 10

What are the physicochemical technical parameters of Quick Penetrant T-70E (Wetting Agent OT)?

Accepted Answer

Quick Penetrant T-70E (Wetting Agent OT) is an anionic surctant with excellent comprehensive performance. Its typical physicochemical parameters cover key dimensions such as penetrating power, surce activity, purity, and stability. See the technical parameter table below for specific data. Detailed Description The chemical full name of Quick Penetrant T-70E (Wetting Agent OT) is Di(2-ethylhexyl) sulfosuccinate sodium salt (CAS: 577-11-7), which belongs to the anionic succinate sulfonate surctant mily. The product is a 70% active concentration solution, appearing as a colorless to light yellow transparent viscous liquid with slight hygroscopicity. Its core physicochemical features include: extremely low surce tension (≤30 mN/m), giving it excellent penetrating and wetting ability; resistance to hard water, acids, and alkalis (resistant to 80~100g/L NaOH), and low foam characteristics, making it very suitable for industrial fields with high requirements for wetting and penetration, such as textiles, pesticides, and emulsion polymerization. According to the Guoli Chemical product database, the standard test data at 25°C covers physical properties, surce activity, and component purity. Among them, penetrating power is one of the core indicators to measure its performance. Using the standard canvas sedimentation method, the penetration time of a 1% aqueous solution is ≤5 seconds, reflecting the product's high-speed penetration characteristics. In addition, the active substance content (diester content) is ≥70%, ensuring sufficient effective ingredients in final applications. In terms of application stability, its acid value (≤2 mg KOH/g) and monoester content (≤1.5%) are strictly controlled to ensure batch-to-batch performance stability. The product also complies with relevant environmental and safety regulations, with heavy metal content (≤10 mg/kg) and arsenic content (≤2 mg/kg) at low levels, meeting the requirements for cleaner production in modern industry. Technical Parameters The following data is based on the Guoli Chemical product database, applicable to standard batch products (70% solution), typical test temperature 25°C: Parameter Category Technical Indicator Typical Value/Specification AppearanceColor and FormColorless to light yellow transparent liquid Ionic TypeIonic PropertyAnionic Active Substance ContentDiester Content≥70% Solid ContentTotal Solids≥70% MoistureWater Content≤30% pH Value1% Aqueous Solution5.0~7.0 Penetrating Power1% Aqueous Solution, Canvas Sedimentation Method≤5 seconds Surce TensionAqueous Solution≤30 mN/m Critical Micelle Concentration (CMC)25°CApprox. 0.1% HLB ValueHydrophilic-Lipophilic Balance ValueApprox. 13 Density25°C1.05~1.10 g/cm³ Kinematic Viscosity25°C≤200 mm²/s Refractive Index25°C1.375~1.385 Flash PointAqueous Solution, Non-Flammable>100°C Saponification Value70% SolutionApprox. 177 mg KOH/g Acid ValueFree Acidity≤2 mg KOH/g Foam CharacteristicsFoam BehaviorLow Foam Chemical StabilityToleranceResistant to Acid, Alkali, and Hard Water Alkali ResistanceTolerable Alkali ConcentrationResistant to 80~100g/L NaOH Monoester ContentBy-product≤1.5% Free AlcoholImpurity≤0.5% Heavy MetalsTotal≤10 mg/kg Arsenic (As)Toxic Element≤2 mg/kg Packaging SpecificationConventional Packaging50kg Plastic Drum, 200kg Plastic Drum, IBC Tote *Note: The above are routine physicochemical technical parameters of the product, only for selection reference, not a sales specification sheet. Application Suggestions Based on its excellent penetration and wetting characteristics, this product is widely used in scenarios requiring efficient reduction of surce tension: Textile Dyeing and Finishing: Used in pretreatment desizing, scouring, bleaching processes, and finishing steps to help chemicals penetrate quickly into the fiber interior. Pesticide Formulations: As a penetration enhancer for emulsifiable concentrates, suspensions, and aqueous solutions, significantly improving the spreading and absorption effect of the spray liquid on target plant surces. Industrial Cleaning and Emulsion Polymerization: Accelerates oil removal and pigment wetting in metal cleaners and coatings, and helps stabilize latex particle size in emulsion polymerization. Precautions During operation, storage, and transportation, pay attention to the product's safety and physicochemical stability: Safety Protection: This product is classified as GHS category 2 for skin/eye irritation. Protective goggles and chemical-resistant gloves (e.g., nitrile gloves) must be worn during operation to prevent contact with skin and eyes. Storage Conditions: Should be stored tightly sealed in a cool, dry, well-ventilated warehouse at 5°C to 35°C, away from direct sunlight. This product has slight hygroscopicity; use as soon as possible after opening.

Quick Penetrant T-70E / Wetting Agent OT

Product Details

Applications

Properties

Safety

Product Overview

Performance Features

Application Guidelines

Packaging and Storage

Quick Penetrant (DOSS) Applications

Product Properties

Safety

GHS

Handling

Storage

First Aid

Related Products

Property	Value
CAS No.	577-11-7
Molecular Formula	C20H37NaO7S
Appearance	Colorless to pale yellow transparent liquid
Ionic Type	Anionic
Avg. Molecular Weight	444.56
Cloud Point	N/A (anionic surfactants)
Active Content	≥70
pH Value(1%)	5.0~7.0
pH Value(5%)	~5.0~7.0 (ref.1%soln.)
Solubility	Readily soluble in water
Surface Tension	≤30
CMC	~0.1% (25℃)
Acid Value	≤2 mg KOH/g
Saponification Value	~252.5 (pure); 70% soln. ~177
Moisture	≤30
Density	1.05~1.10 g/cm³ (25°C)
Kinematic Viscosity	≤200 mm²/s (25°C)
Refractive Index	1.375~1.385 (25°C)
Flash Point	>100°C (aq. soln., non-flammable)
Hygroscopicity	Hygroscopic
Chemical Stability	Resistant to acids, alkalis and hard water
Penetration	≤5 s (1% aq., canvas disc)
Foam Property	Low foam
Alkali Resistance	Good; resistant up to 80-100 g/L NaOH
Viscosity	Low viscosity liquid
Melting Point	N/A (liquid as 70% aq. solution)
Monoester Content	≤1.5%
Diester Content	≥70% (active content)
Low Shear Viscosity	≤200 mPa·s
Solid Content	≥70%
Free Alcohol	≤0.5%
Heavy Metal	≤10 mg/kg
Arsenic	≤2 mg/kg

Quick Penetrant T-70E / Wetting Agent OT

Product Details

Applications

Properties

Safety

Product Overview

Performance Features

Application Guidelines

Packaging and Storage

Quick Penetrant (DOSS) Applications

Product Properties

Safety

GHS

Handling

Storage

First Aid

Related Products

High-content Quick Penetrant T-75A

Quick T-70B, Quick Penetrant T, Wetting Agent OT

Quick Penetrant T-40

Quick Penetrant T-50

Quick Penetrant T-50H