The environmental characteristics of isotridecanol phosphate ester E-1306P (CAS: 9043-30-5) need to be viewed dialectically from two dimensions: On one hand, according to Guoli Chemical's product database, the product has heavy metal content ≤10 mg/kg, arsenic content ≤2 mg/kg, free phosphoric acid ≤0.5%, and no amine value detected, indicating high purity and extremely low risk of persistent organic pollutants and heavy metal residues. On the other hand, its safety instructions clearly state 'harmful to aquatic life,' and the leakage emergency treatment requires 'avoid entering water bodies, treat as hazardous waste,' so it is not a product without environmental risk.
Regarding 'whether it meets environmental requirements,' the answer to this question is highly dependent on the specific regulatory framework and application scenario (such as EU REACH regulations, China's 'Measures for the Environmental Management Registration of New Chemical Substances', textile industry ZDHC MRSL, etc.). Guoli Chemical's product database currently does not provide specific regulatory compliance declarations for this product (such as REACH registration number, MRSL compliance statement, biodegradation rate data, etc.). It is recommended that you compare the product parameters such as heavy metal and arsenic limits based on your industry and export destination requirements, or directly contact Guoli Chemical for confirmation.
Regarding test reports, the database shows that the product has detailed theoretical parameters and physicochemical indicators. Usually, Guoli Chemical will provide a Certificate of Analysis (COA) and Safety Data Sheet (SDS). If you need specific test reports issued by third-party authoritative organizations (such as SGS RoHS testing, ZDHC compliance report, biodegradability test report, etc.), you need to directly apply to Guoli Chemical's sales or technical department for verification.
| Parameter Item | Specification/Value | Potential Environmental/Safety Significance |
|---|---|---|
| Total Heavy Metals | ≤10 mg/kg | Extremely low limit meets the initial requirements of most environmental regulations |
| Arsenic (As) Content | ≤2 mg/kg | Below the strict limits for general industrial chemicals |
| Free Phosphoric Acid | ≤0.5% | Low free acid reduces the risk of eutrophication contribution to water bodies |
| pH Value (1% Aqueous Solution) | 5.0~7.0 | Near neutral to slightly acidic, with less impact on pH during treatment |
| Chemical Stability | Stable under normal conditions | Not easy to decompose to produce currently unknown highly toxic by-products |
| Aquatic Hazard | Harmful to aquatic life | Strictly prohibited from direct discharge into water bodies, wastewater treatment required |
| Iodine Value (Unsaturation) | ≤0.5 | Low unsaturation, chemically stable, not easy to oxidize and deteriorate |
When using or compounding, if the end product requires 'environmentally friendly' or 'green' labeling, it is recommended that you take the following steps: