Isotridecanol polyether E-1306 is a nonionic surfactant that is chemically stable under normal use and storage conditions. However, its primary hazard is severe eye irritation (GHS hazard classification: serious eye damage/eye irritation Category 2, signal word "Warning", hazard statement H319). Therefore, wearing chemical safety goggles or a face shield during work is the most critical protective requirement.
Although this product has a flash point above 100°C (closed cup) and is not classified as a flammable liquid, its auto-ignition temperature is approximately 290°C. There is still a risk of combustion when exposed to open flames, high heat, or strong oxidizers. Therefore, the operating area should be kept away from heat sources, sparks, and open flames; smoking is prohibited; and good ventilation should be maintained to avoid the formation of aerosols or atomized droplets.
From a long-term operational perspective, workers should develop good hygiene practices: no eating, drinking, or smoking during work; thoroughly wash any exposed skin after work; work clothes should be stored separately; contaminated clothing must be cleaned before reuse. The product should be stored in a cool, dry, well-ventilated warehouse, with a recommended temperature range of 5°C to 40°C, avoiding direct sunlight. Containers should be kept tightly closed, away from strong oxidizers, strong acids, strong bases, and other incompatible substances.
| Safety Dimension | Specific Requirement |
|---|---|
| Eye Protection | Must wear chemical safety goggles or face shield (most important) |
| Skin Protection | Wear protective gloves, thoroughly wash after work |
| Ventilation Requirement | Work area must have general ventilation or local exhaust ventilation |
| Ignition Source Management | Keep away from open flames, sparks, heat sources; no smoking |
| Storage Temperature | 5°C — 40°C, cool and dry place, avoid direct sunlight |
| Packaging Material | Stainless steel, polyethylene (PE) or polypropylene (PP) containers |
| Incompatible Substances | Strong oxidizers, strong acids, strong bases |
Immediately open the eyelids and rinse gently with plenty of running water or normal saline for at least 15 minutes. If wearing contact lenses and easy to remove, remove them and continue rinsing. If eye irritation persists after rinsing, seek medical attention immediately and present the Safety Data Sheet (SDS) of this product to the doctor.
Immediately remove contaminated clothing and thoroughly wash the affected area with plenty of soap and water. If skin redness or persistent discomfort occurs, seek medical attention.
Move the person to fresh air immediately and maintain an open airway. If difficulty breathing or persistent cough occurs, seek medical attention immediately.
Do NOT induce vomiting. Rinse mouth with water and seek medical attention immediately, presenting this document. Do not give anything by mouth to an unconscious person.
For small spills, cover with inert absorbent material (e.g., vermiculite, dry sand) and collect into a closed container for disposal. For large spills, quickly dike to prevent spreading to sewers or water sources, and cover with foam to suppress vapor generation. Personal protective equipment must be used throughout the process.
Suitable extinguishing media: alcohol-resistant foam, dry powder, carbon dioxide, or water spray. In case of fire in enclosed spaces, firefighters should wear self-contained breathing apparatus and full protective clothing.