The tristyrylphenol polyoxyethylene ether 600-2 and 600-1 series are designed with a balance of efficacy and safety, belonging to low-toxicity, high-flash-point nonionic surfactants. From an environmental and regulatory perspective, this product is not classified as a flammable liquid (flash point >150°C), which is beneficial for storage, transportation, and atmospheric pollution prevention. According to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS), the only health hazard classifications for this product are skin irritation (H315) and serious eye irritation (H319). There is no known carcinogenicity, mutagenicity, or reproductive toxicity, making it a relatively safe basic chemical raw material in risk assessment.
Regarding controlled substances such as heavy metals, this product’s control standards are: total heavy metals ≤10 mg\/kg, arsenic content ≤2 mg\/kg, meeting the environmental impurity restrictions required by many domestic and international industrial cleaning and pesticide formulation fields. However, for in-depth environmental indicators such as biodegradability (e.g., OECD 301 series standards), there is currently no specific data in the general product database of Guoli Chemical. If your end application has specific requirements for biodegradability, it is recommended to conduct targeted third-party testing.
The following are the tested technical indicators directly related to the environmental friendliness, purity, and safety of this product (data source: Guoli Chemical Product Database):
| Test Item | Specification or Data | Environmental\/Safety Note |
|---|---|---|
| Active Content | ≥99% | High purity, fewer impurities, reduced environmental burden |
| pH Value (1% Aqueous Solution) | 5.0 ~ 7.0 | Near neutral, mild environmental impact |
| Total Heavy Metals | ≤10 mg\/kg | Meets general environmental control standards |
| Arsenic Content (As) | ≤2 mg\/kg | Below conventional hazardous element limits |
| Moisture Content | ≤1.0% | Low moisture, stable physical properties |
| Flash Point | >150°C | Not a flammable liquid, safe storage and transport, environmentally friendly |
| Biodegradability Specific Data | No database record available | If required, additional testing needs to be arranged |
Obtain Official Test Reports: Guoli Chemical has a strict quality control system. Routine factory inspection covers active content, pH value, moisture content, heavy metals, and appearance. If you require a stamped Product Test Report (COA) or a specific batch of Safety Data Sheet (SDS), please contact the sales or technical customer service department of Guoli Chemical directly.
Environmental Application Verification: Before use in regions with strict export regulations (e.g., EU REACH regulations) or in pesticide formulations with high environmental standards (e.g., applied in water source protection areas), since complete biodegradation and ecotoxicity data are not available in the database, it is recommended to apply for relevant environmental compliance testing for the specific formulated product or consult Guoli Chemical technical personnel to confirm formulation compatibility.