Question

Precautions for using PEG600DO, Polyethylene Glycol 600 Dioleate?

Answer
2026-05-17 官方文档 PEG600DO,聚乙二醇600双油酸酯

When using PEG600DO, three main aspects should be focused on: personal protection, storage conditions, and leakage treatment. Although this product is a low-toxicity, non-hazardous substance, standardized operation is still required to ensure safety.

Detailed Explanation

PEG600DO (Polyethylene Glycol 600 Dioleate) is not classified as a dangerous chemical according to GHS classification, but toxicological experiments show that it has mild irritating effects on the skin and eyes (skin irritation category 2, H315; eye irritation category 2A, H319). Therefore, during daily operations, direct contact with the skin and eyes should be avoided. It is recommended to wear chemical safety goggles. If long-term or repeated contact is required, protective gloves made of nitrile rubber or neoprene should also be worn.

The flash point of this product is greater than 150°C (closed cup), making it a non-flammable liquid. However, good ventilation should still be ensured during operations, and heating or generating oil mist in enclosed spaces should be avoided. If discomfort occurs due to inhaling a large amount of vapor during high-temperature operations, immediately move to a place with fresh air. After operations, hands must be thoroughly washed with soap and clean water. Eating, drinking, or smoking is strictly prohibited in the workplace.

For leakage treatment, inert absorbing materials such as sand, vermiculite, etc., should be used to cover and collect the spilled material into a closed container. Residues can be wiped and rinsed with soapy water. Waste disposal must comply with local environmental regulations. This product has some biodegradability, but large amounts of leakage into sewers, water sources, or soil should still be prevented.

Key Safety Parameters

ItemParameter
Hazard ClassificationNon-hazardous substance
Acute Oral Toxicity (Rat)LD50 > 5000 mg/kg (Low toxicity)
Flash Point (Closed Cup)> 150°C
Skin IrritationMild irritation (H315)
Eye IrritationMild irritation (H319)
Recommended Storage Temperature5-40°C

Storage and Operation Recommendations

  • Seal and prevent moisture: After opening the lid and taking out the material, immediately reseal it. Keep the container upright with the lid facing upward to prevent moisture from entering.
  • Cool and avoid light: Store in a cool, dry, and well-ventilated warehouse, avoiding direct sunlight and high-temperature environments.
  • Keep away from incompatible substances: Store away from strong oxidizing agents. Although it is non-flammable, keep away from open flames.
  • Handle gently: Avoid splashing during operations to reduce unnecessary contact risks.

Key Points for Emergency Treatment

Skin contact: Immediately remove contaminated clothing and gently wash with plenty of running water and soap. If redness or irritation persists, seek medical attention promptly. Eye contact: Immediately open the eyelids and rinse thoroughly with running water or normal saline for at least 15 minutes. If there is persistent pain or corneal redness, be sure to visit an eye doctor. Ingestion: Rinse the mouth immediately with clean water, do not induce vomiting, and seek medical attention with the safety data sheet. If the patient is unconscious, do not give anything by mouth.