Environmentally friendly penetrant JFC is a non-flammable liquid (flash point >150°C), but it still needs to be stored strictly according to specified conditions to ensure stable product performance and safe use. The storage environment should be a cool, dry, well-ventilated dedicated warehouse, away from heat sources and direct sunlight, to prevent product decomposition or property changes caused by high temperatures.
During storage, containers must be kept tightly sealed to prevent leakage and moisture absorption. It is recommended to control the storage temperature between 5°C and 40°C. Exceeding this temperature range may affect the core properties such as emulsification and penetration. After long-term storage, check whether the product appearance is normal (normal state is a colorless to slightly yellow transparent liquid) before use; if abnormal, it is not recommended to continue using.
Additionally, this product should be stored separately from incompatible substances such as strong oxidizers, strong acids, and strong bases, avoiding mixed storage. The storage area should be equipped with spill containment facilities, and the floor should be corrosion-resistant and easy to clean, while keeping away from food, beverages, feed, and other living materials to prevent accidental ingestion.
| Storage Parameter | Requirement |
|---|---|
| Storage Temperature Range | 5°C to 40°C |
| Storage Environment | Cool, dry, well-ventilated dedicated warehouse |
| Light Requirement | Avoid direct sunlight |
| Container Condition | Keep tightly sealed to prevent leakage and moisture |
| Incompatible Substances | Strong oxidizers, strong acids, strong bases, etc. |
| Storage Facility Requirements | Equipped with spill containment facilities, corrosion-resistant and easy-to-clean floor |
In industrial scenarios, it is recommended to store the product in a dedicated chemical warehouse near the production workshop for easy daily access. For users purchasing in bulk, IBC totes or large storage tanks can be used, but it is necessary to ensure that the tank material is compatible with this non-ionic surfactant (stainless steel or polyethylene is recommended). The storage area should be equipped with emergency eyewash and shower equipment to handle possible leakage or contact accidents.
If the product has been stored for a long time or experienced low-temperature environments, check whether the product appearance remains transparent and uniform before use. Turbidity or stratification may occur at low temperatures; generally, returning to room temperature and appropriate stirring can restore normalcy without affecting the usage effect.