The storage conditions of 600P-85% tristyrylphenol ethoxylate phosphate directly affect the product's stability and performance. This product is packaged in dedicated drums or IBC totes with sealed packaging. The storage environment must be kept cool, dry, and well-ventilated, avoiding direct sunlight and rain to prevent moisture absorption or packaging deterioration.
Regarding temperature control, it is recommended to maintain the storage environment temperature between 5°C and 40°C. Too low temperatures may cause the product to freeze, damaging its emulsifying and dispersing properties; too high temperatures may accelerate oxidation or degradation. The warehouse should be kept away from heat sources, sparks, and open flames. The storage area must be equipped with spill emergency response equipment and appropriate fire extinguishing equipment to handle emergencies.
Opened products should be used as soon as possible. If not used up at once, they must be resealed properly to prevent moisture absorption or contamination. Under recommended storage conditions, the shelf life of unopened original packaging is subject to the factory inspection report.
| Storage Parameter | Specific Requirement |
|---|---|
| Storage Temperature | 5°C to 40°C |
| Environment Requirement | Cool, dry, well-ventilated, avoid direct sunlight and rain |
| Container Requirement | Corrosion-resistant lined sealed container, ensure tight sealing |
| Keep Away From | Heat sources, sparks, open flames |
| Incompatible Substances | Strong oxidizers, strong bases, strong acids (store separately) |
| Packaging Form | Dedicated packaging drum or sealed IBC tote |
| Area Equipped With | Spill emergency response equipment, appropriate fire extinguishing equipment |
When dispensing the product, ensure the operating environment is well-ventilated, and operators wear appropriate personal protective equipment (chemical safety goggles, chemical-resistant gloves, and protective clothing). After opening and dispensing, immediately reseal the container to minimize product contact with air, preventing moisture absorption and contamination.