The storage conditions of 600P-85% tristyrylphenol polyoxyethylene ether phosphate directly affect product performance and service life. This product is sealed in 50kg plastic drums, 200kg plastic drums, or IBC totes. During storage, ensure the container is tightly sealed to prevent moisture absorption and external contamination. The product should be kept away from heat sources, sparks, and open flames, and avoid direct sunlight and rain. Since the phosphate ester structure may undergo hydrolysis under alkaline conditions, it must be stored separately from incompatible substances such as strong oxidizers, strong bases, and strong acids.
Regarding shelf life, the Guoli Chemical product database clearly states that under recommended storage conditions, the shelf life of unopened original packaging is based on the factory inspection report, and there is no uniform fixed shelf life period. Once opened, the product should be used up as soon as possible. If it cannot be used all at once, it must be resealed and stored to avoid prolonged exposure to air, which may cause moisture absorption or performance changes. It is recommended that users check the relevant instructions in the factory inspection report upon receipt and plan usage reasonably based on actual storage conditions.
| Storage Requirement | Specific Description |
|---|---|
| Temperature Range | 5°C ~ 40°C, avoid freezing or prolonged high temperature exposure |
| Environmental Requirement | Cool, dry, well-ventilated dedicated warehouse |
| Light Protection Requirement | Avoid direct sunlight |
| Container Requirement | Use sealed containers with corrosion-resistant lining, ensure tight seal |
| Keep Away from Fire Sources | Keep away from heat sources, sparks, and open flames (flash point >150°C) |
| Isolated Storage | Store separately from strong oxidizers, strong bases, and strong acids |
| Packaging Specifications | 50kg plastic drum / 200kg plastic drum / IBC tote |
| Shelf Life | Based on factory inspection report (unopened original packaging) |
It is recommended to establish a first-in, first-out (FIFO) inventory management system, regularly check container seals, and promptly address any leaks or container damage. The storage area must be equipped with emergency spill response equipment (e.g., inert adsorbent materials such as dry sand, vermiculite) and appropriate fire extinguishing agents (dry powder, carbon dioxide, alcohol-resistant foam, or water spray). Do not discharge the product directly into sewers, soil, or any water bodies. Waste disposal must comply with local environmental regulations.