Peregal O-3 (fatty alcohol polyoxyethylene (3) ether, CAS No.: 68439-49-6) is a nonionic surfactant manufactured by Haian Guoli Chemical Co., Ltd. Its GHS hazard classification is Skin Irritation (Category 2) and Serious Eye Irritation (Category 2A), with the signal word "Warning". During use, operators must strictly follow safe operating procedures, wear appropriate personal protective equipment, and avoid direct contact of the product with skin and eyes. In addition, this product is harmful to aquatic life (Hazardous to the aquatic environment, Acute Hazard Category 3). Never discharge the product or packaging waste into water bodies, sewers, or soil.
Peregal O-3 is chemically stable and remains active under a wide range of acid-base conditions and in hard water media. However, when in contact with incompatible substances such as strong oxidizers, strong acids, and strong alkalis, hazardous reactions may occur. Therefore, it should be stored and used away from these substances. Although the product is not highly flammable, it may release irritating or toxic fumes in a fire scenario, so caution is required during firefighting.
| Contact Type | Emergency Measures |
|---|---|
| Skin Contact | Immediately remove contaminated clothing and flush skin with plenty of soap and water for at least 15 minutes. If irritation or discomfort occurs, seek medical advice. |
| Eye Contact | Immediately flush eyes with plenty of water or normal saline for at least 15 minutes, keeping eyelids open during rinsing. Seek medical attention as soon as possible. |
| Inhalation | Move the affected person to fresh air immediately and keep airway clear. If breathing is difficult, administer oxygen. If breathing has stopped, perform artificial respiration and seek medical attention. |
| Ingestion | Rinse mouth immediately with water. Do not induce vomiting. If the person is conscious, give small amounts of water to drink. Seek medical attention immediately. (Harmful if swallowed) |
Peregal O-3, with its excellent water-in-oil (W/O) emulsifying ability, wetting, and penetrating properties, is widely used in the following areas: preparation of cosmetic creams and lotions, synthetic fiber spin finishes, industrial degreasing and hard surface cleaning, textile dyeing and printing leveling agents and penetrating agents, metalworking fluids (cutting fluids, grinding fluids, etc.), and pesticide emulsifiable concentrate formulations. Users are advised to conduct small-scale tests to verify compatibility and optimal dosage before use, avoiding adverse reactions with other chemical additives. Waste products and contaminated containers must be disposed of by qualified professional waste treatment agencies in accordance with national and local environmental regulations.