Super Penetrant JFC-E (Dioctyl Sodium Sulfosuccinate) is a nonionic fatty alcohol polyoxyethylene ether surfactant, appearing as a colorless to slightly yellow transparent liquid. Its acute toxicity (oral, rat) LD₅₀ > 2000 mg/kg, making it a low-toxicity substance. GHS eye irritation category is 2B, causing mild eye irritation. It is safe under normal use conditions, but basic chemical handling norms must still be followed.
This product exhibits excellent chemical stability, maintaining performance stability in acidic, alkaline, and hard water systems. Its nonionic nature provides good compatibility with anionic, cationic, and amphoteric auxiliaries, allowing flexible compounding without easy precipitation. However, direct mixing with incompatible substances such as strong oxidizers, strong acids, and strong alkalis should be avoided during storage and use to prevent affecting product performance.
This product has extremely low surface tension, excellent penetrating and wetting ability, and low foaming, facilitating continuous production. It is widely used in textile printing and dyeing, leather processing, industrial cleaning, pesticide formulations, papermaking, and daily chemicals. It is recommended to determine the dosage according to specific process requirements. Generally, as a penetrating component in formulations, the recommended dosage varies by application scenario, and the specific ratio should be determined through experiments.
Spill Handling: Cut off the spill source. For small spills, absorb with sand, vermiculite, or other inert materials and collect in a sealed container. For large spills, dike and contain, transfer to a dedicated collector using an explosion-proof pump, and recover or dispose of at a waste treatment site. Prevent spills from entering sewers, water sources, and soil.
Skin Contact: Immediately remove contaminated clothing and rinse with plenty of running water for at least 15 minutes. Seek medical attention if discomfort occurs.
Eye Contact: Immediately lift eyelids and rinse thoroughly with plenty of running water or saline for at least 15 minutes. If irritation persists, seek medical attention.
Inhalation: Quickly move to fresh air, maintain airway patency. If breathing is difficult, give oxygen; if breathing stops, perform artificial respiration immediately and seek medical attention.
Ingestion: Rinse mouth with water, drink plenty of warm water, induce vomiting (only if fully conscious), and seek immediate medical attention.
When used as an efficient penetrant in textile pretreatment (desizing, scouring, bleaching), it is recommended to control the working fluid temperature appropriately to fully utilize its penetrating and wetting properties. In dyeing processes, as a leveling and penetrating auxiliary, it can effectively prevent uneven dyeing, improve leveling and color yield, and is suitable for various dye systems. When used as a wetting and penetrating auxiliary in pesticide formulations, attention should be paid to compatibility with other components and safety assessment for target crops. In industrial cleaning formulations, its low-foam and high-efficiency characteristics are particularly suitable for continuous cleaning operations.
The nonionic nature of this product endows it with broad compounding compatibility; it can be used with anionic, cationic, and amphoteric surfactants without easy precipitation. However, it is recommended to conduct small-scale tests before actual compounding to confirm system stability and synergistic effects. Direct mixing with strong oxidizers, strong acids, and strong alkalis is strictly prohibited to avoid adverse reactions or structural damage to the product.