What are the main components of Super Penetrant JFC-E?

The main component of Super Penetrant JFC-E is nonionic fatty alcohol polyoxyethylene ether surfactant.

Detailed Description

Super Penetrant JFC-E (CAS No.: 1639-66-3) is a nonionic surfactant with fatty alcohol polyoxyethylene ether as the core component. This product is also commonly referred to as Quick Penetrant T, Penetrant OT, or Aerosol OT. Its aliases involve dioctyl sodium sulfosuccinate, which is one of its important active components. The product appears as a colorless to slightly yellow transparent liquid with extremely low surface tension, providing the working solution with instant penetration and rapid wetting capabilities.

From a chemical structural perspective, fatty alcohol polyoxyethylene ether consists of hydrophobic fatty alcohol chain segments and hydrophilic polyoxyethylene chain segments. This "amphiphilic" structure allows it to efficiently orient at interfaces, significantly reducing the liquid surface tension and interfacial tension. This component exhibits excellent chemical stability in acidic, alkaline, and hard water systems and can be well compounded with anionic, cationic, and amphoteric auxiliaries without precipitation, offering strong formulation adaptability.

Dioctyl sodium sulfosuccinate (abbreviated as DOSS), as an important anionic component associated with this product, is itself a highly efficient quick penetrant, widely used in textiles, pesticides, daily chemicals, and other fields. The synergy between the two enables JFC-E to maintain low-foam characteristics while achieving excellent super penetration and wetting-spreading performance.

Application Recommendations

Based on its component characteristics, Super Penetrant JFC-E is suitable for the following typical scenarios:

• Textile Printing and Dyeing: Used as a highly effective penetrant in processes such as desizing, scouring, bleaching, and dyeing. Recommended dosage is 0.1% to 0.5% (based on the weight of the working solution), significantly improving fiber wetting and chemical penetration.
• Industrial Cleaning: Used as a penetration-enhancing additive in hard surface cleaners. Recommended addition amount in heavy-duty cleaning formulations is 1% to 3%.
• Pesticide Formulations: Used as a wetting and penetration adjuvant. Recommended addition amount is 0.05% to 0.3%, improving the spreading and penetration ability of the liquid on the target surface.
• Leather and Paper: In processes such as soaking, degreasing, and deinking, it accelerates the penetration of chemicals into the fiber interior. Recommended dosage is adjusted to 0.2% to 1% based on process conditions.

Precautions

• This product is a non-hazardous substance and is classified as low toxicity (LD₅₀ > 2000 mg/kg), but it is mildly irritating to the eyes. It is recommended to wear chemical safety goggles during operation.
• Storage temperature should be controlled between 5 and 35°C, avoiding direct sunlight. Keep away from strong oxidizers, strong acids, and strong bases.
• In case of accidental contact with eyes, rinse immediately with plenty of water for at least 15 minutes. If irritation persists, seek medical attention promptly.