Question

What are the advantages of Peregal O-50/100 compared to other similar products?

Answer
2026-06-06 官方文档 平平加O-50/100

The core advantage of Peregal O-50/100 lies in its unique combination of ultra-long EO chain (50~100 EO) and C₁₆~C₁₈ long carbon chain, far surpassing conventional AEO series products (such as AEO-9, AEO-15, AEO-23, etc.) in emulsion stability, high temperature/electrolyte resistance, and low foaming properties.

Detailed Description

Peregal O-50/100 and other AEO series products (such as MOA-3/9, OS-15, MOA-23) under Guoli Chemical belong to the fatty alcohol polyoxyethylene ether family, but there are fundamental differences in their design and positioning. Conventional AEO products (EO number 3~23) are mainly known for their wetting, penetration, detergency, and moderate emulsifying ability, suitable for daily cleaning and general emulsification scenarios; while Peregal O-50/100, with 50 or even 100 ethylene oxide adducts, has a polyoxyethylene hydrophilic chain segment 2 to 10 times longer than similar products, extremely strong hydrophilicity (HLB value up to 18 or more), thus bringing three qualitative leaps: excellent emulsion storage stability (strong steric hindrance effect prevents droplet coalescence), superior electrolyte and high temperature resistance (unaffected by hard water, salts, and high-temperature dyeing conditions), and very low foaming property (almost no foam, suitable for circulation pumping and spraying processes).

At the same time, the hydrophobic group of Peregal O-50/100 is C₁₆~C₁₈ natural fatty alcohol, with a longer carbon chain than the conventional C₁₂~C₁₄ products, providing stronger affinity for non-polar substances such as mineral oils, fatty acids, and waxes, resulting in higher emulsification efficiency. This molecular structure of "long hydrophobic chain + ultra-long hydrophilic chain" makes it an ideal choice for preparing fine particle size, long-term stable emulsions, which low EO number AEO products cannot achieve.

In terms of safety and environmental protection, Peregal O-50/100 also performs excellently: non-toxic, non-irritating to skin, excellent biodegradability, and stable performance under high salt concentration and wide pH range, without salting out or decomposition failure, with comprehensive performance significantly superior to most conventional nonionic surfactants.

Technical Parameters

Comparison ItemPeregal O-50/100Conventional AEO Series (AEO-9/15/23, etc.)
EO Adduct NumberApproximately 50 (O-50) or 100 (O-100)3~23
Hydrophobic Carbon ChainC₁₆~C₁₈C₁₂~C₁₄
HLB Range≈18~19 (highly hydrophilic)≈8~16
Appearance (25℃)White to slightly yellow waxy/flake solidLiquid to paste/waxy solid
Water SolubilityO-50 dispersible in hot water, O-100 soluble in cold waterIncreases with EO number
Foaming PropertyVery low, nearly no foamLow to high foam (lower EO gives less foam)
Electrolyte/Hard Water ResistanceExcellent, not easily salted outModerate, may be affected under high salt
Emulsion StabilityExcellent (strong steric stabilization)Fair to good
Cloud Point>100℃ (O-100)Generally <100℃

Application Recommendations

Scenarios where Peregal O-50/100 is preferred:

  • High temperature and high pressure dyeing: For leveling dyeing of polyester and acrylic fibers at temperatures above 130℃, the cloud point advantage of Peregal O-100 is irreplaceable; conventional AEO products may precipitate and fail at such temperatures.
  • Emulsion polymerization: For O/W emulsification of vinyl acetate and acrylate systems to prepare polymer emulsions with uniform particle size and storage stability, Peregal O-50/100 is the ideal primary emulsifier.
  • Pesticide EW/ME formulations: To maintain uniform suspension of fine droplets for a long time, the strong steric stabilization of Peregal O-100 is key to long-term stability of the formulation.
  • Low-foam/no-foam cleaning systems: In processes with strict foam control such as circulation pumping and spray cleaning, the nearly non-foaming property of Peregal O-50/100 is unmatched by conventional AEO products.
  • High-salt/strong alkali formulations: Scenarios requiring electrolyte tolerance such as metal cleaners, rolling oils, etc.

Scenarios where conventional AEO is more suitable:

  • General wetting penetration (AEO-3/9), everyday detergency cleaning, moderate emulsification needs with no strict foam limitations. If cost-sensitive and extreme stability is not required, OS-15 or MOA-23 can be selected.

Precautions

  • Peregal O-50 is waxy solid at room temperature; it is recommended to stir and dissolve it in hot water at 40~60℃ during formulation; Peregal O-100 can be directly dispersed and dissolved in water at room temperature.
  • It is recommended to determine the optimal dosage in the specific formulation through pilot tests to achieve desired results.
  • This product is non-toxic and non-irritating, but it is still recommended to wear gloves and goggles during operation to avoid prolonged direct contact.
  • Storage temperature is recommended not to exceed 40℃, away from direct sunlight and humid environment.